Since magnetism is strongly stress dependent, Magnetic Flux Leakage (MFL) inspection tools have the potential to locate and characterize mechanical damage in pipelines. However, MFL application to mechanical damage detection faces hurdles which make signal interpretation problematic: 1) the MFL signal is a superposition of geometrical and stress effects, 2) the stress distribution around a mechanically damaged region is very complex, consisting of plastic deformation and residual (elastic) stresses, 3) the effect of stress on magnetic behaviour is not well understood. This paper summarizes recent results of experimental and modeling studies of MFL signals resulting from mechanical damage. In experimental studies, mechanical damage was simulated using a tool and die press to produce dents of varying depths in plate samples. Radial component MFL measurements were made before and after selective stress-relieving heat treatments. These annealing treatments enabled the stress and geometry components of the MFL signal to be separated. Geometry and stress effects generate separate MFL peaks — the geometry effects lead to central peak regions while the stress effects produce ‘shoulder’ peaks. In general the geometry peaks tend to scale with depth, while the shoulder peaks remain approximately constant. This implies that deep dents will display a ‘geometry’ signature while shallow or rerounded dents will have a stress signature. Finally, the influence of other parameters such as flux density and topside/bottomside inspection was also quantified. In the finite element analysis work, stress was incorporated by modifying the magnetic permeability in the residual stress regions of the modeled dent. Both stress and geometry contributions to the MFL signal were examined separately. Despite using a number of simplifying assumptions, the modeled results matched the experimental results very closely, and were used to aid in interpretation of the MFL signals.
- International Petroleum Technology Institute
Detection of Mechanical Damage Using the Magnetic Flux Leakage Technique
- Views Icon Views
- Share Icon Share
- Search Site
Clapham, L, Babbar, V, & Byrne, J. "Detection of Mechanical Damage Using the Magnetic Flux Leakage Technique." Proceedings of the 2004 International Pipeline Conference. 2004 International Pipeline Conference, Volumes 1, 2, and 3. Calgary, Alberta, Canada. October 4–8, 2004. pp. 983-990. ASME. https://doi.org/10.1115/IPC2004-0006
Download citation file: