Determination of ligament forces is an integral part of understanding their contribution during motion and external loading of an intact joint. While almost all previous investigations have reported only the magnitude of tension, this alone cannot adequately describe the function of a particular ligament. An alternative approach to determine the in-situ forces in ligaments has been developed which utilizes a universal force-moment sensor in conjunction with a force transformation scheme. In addition to providing the magnitude of ligament force, the direction and point of application of this in-situ force can also be determined. Further, the approach does not require mechanical contact with the ligament. Application of this new methodology is demonstrated for the human anterior cruciate ligament in the present study (n = 7) although it may be similarly applied to other ligaments at the knee or in other synovial joints of the human body.

Issue Section:
Technical Papers
Topics:
Sensors, Anterior cruciate ligament, Knee, Tension
1.
Ahmed
A. M.
,
Hyder
A.
,
Burke
D. L.
, and
Chan
K. H.
, “
In-Vivo Ligament Tension Patterns in the Flexed Knee in Passive Loading
,”
J. Orthop. Res.
, Vol.
5
,
1987
, pp.
217
–
230
.
2.
Ahmed
A. M.
,
Burke
D. L.
,
Duncan
N. A.
, and
Chan
K. H.
, “
Ligament Tension Patterns in the Flexed Knee in Combined Passive Anterior Tibial Translation and Axial Rotation
,”
J. Orthop. Res.
, Vol.
10
,
1992
, pp.
854
–
867
.
3.
Barry
D.
, and
Ahmed
A. M.
, “
Design and Performance of a Modified Buckle Transducer for the Measurement of Ligament Tension
,”
ASME JOURNAL OF BIOMECHANICAL ENGINEERING
, Vol.
108
,
1986
, pp.
149
–
152
.
4.
Craig, J. J., Introduction to Robotics, 2nd edition, Addison-Wesley, New York, 1989.
5.
France
P. E.
,
Daniels
A. U.
,
Goble
M. E.
, and
Dunn
H. K.
, “
Simultaneous Quantitation of Knee Ligament Force
,”
J. Biomech.
, Vol.
16
,
1983
, pp.
553
–
564
.
6.
Fujie
H.
,
Mabuchi
K.
,
Woo
S. L.-Y.
,
Livesay
G. A.
,
Arai
S.
, and
Tsukamoto
Y.
, “
The Use of Robotics Technology to Study Human Joint Kinematics: A New Methodology
,”
ASME JOURNAL OF BIOMECHANICAL ENGINEERING
, Vol.
115
,
1993
, pp.
211
–
217
.
7.
Girgis
F. G.
,
Marshall
J. L.
, and
Al Monajem
A. R. S.
, “
The Cruciate Ligaments of the Knee Joint: Anatomical and Experimental Analysis
,”
Clin. Orthop.
, Vol.
106
,
1975
, pp.
216
–
231
.
8.
Hefzy
M. S.
, and
Grood
E. S.
, “
Sensitivity of Insertion Locations on Length Patterns of Anterior Cruciate Ligament Fibers
,”
ASME JOURNAL OF BIOMECHANICAL ENGINEERING
, Vol.
108
,
1986
, pp.
73
–
82
.
9.
Holden, J. P., Grood, E. S., and Cummings, J. F., “The Effects of Flexion Angle and Tibial Rotation on Force Measurement in the Caprine Anterior Cruciate Ligament,” Third U.S./China/Japan Conference on Biomechanics, Atlanta, GA, 1991.
10.
Holden, J. P., Korvick, D. L., Grood, E. S., Cummings, J. F., and Bylski-Austrow, D. L., “In Vivo Forces in the Anterior Cruciate Ligament During Walking and Trotting in a Quadruped,” The Second North American Congress on Biomechanics, Chicago, IL, 1992.
11.
Hollis, J. M., “Use of a Six Degree of Freedom Position Control Actuator to Study Joint Mechanics,” 1991 Advances in Bioengineering, R. Vanderby, Jr., ed., BED-20, 1991, pp. 409–411.
12.
Hollis
M. J.
,
Takai
S.
,
Adams
D. J.
,
Horibe
S.
, and
Woo
S. L.-Y.
, “
The Effects of Knee Motion and External Loading on the Length of the Anterior Cruciate Ligament: A Kinematic Study
,”
ASME JOURNAL OF BIOMECHANICAL ENGINEERING
, Vol.
113
,
1991
, pp.
208
–
214
.
13.
Lewis
J. L.
,
Lew
W. D.
,
Hill
J. A.
,
Ohland
K. J.
,
Kirstukas
S.
, and
Hunter
R. E.
, “
Knee Joint Motion and Ligamental Forces Before and After ACL Reconstruction
,”
ASME JOURNAL OF BIOMECHANICAL ENGINEERING
, Vol.
11
,
1989
, pp.
97
–
106
.
14.
Lewis
J. L.
,
Lew
W. D.
, and
Schmidt
J.
, “
Note on the Application and Evaluation of the Buckle Transducer for Knee Ligament Force Measurement
,”
ASME JOURNAL OF BIOMECHANICAL ENGINEERING
, Vol.
104
,
1982
, pp.
125
–
128
.
15.
Lorry, B. S., Grood, E. S., Bohanan, B. S., and Bylski-Austrow, D., “An In-Vitro Test System for Conducting Multi-Axial Load-Displacement Tests on Diarthrodial Joints,” 1991 Biomechanics Symposium, R. L. Spilker and M. H. Friedman, eds., AMD-120, 1991, pp. 141–144.
16.
Markolf
K. L.
,
Gorck
J. F.
,
Kabo
J. M.
, and
Shapiro
M. S.
, “
Direct Measurement of Resultant Forces in the Anterior Cruciate Ligament
,”
J. Bone Joint Surg.
, Vol.
72A
,
1990
, pp.
557
–
567
.
17.
Markolf
K. L.
,
Wascher
D. C.
, and
Finerman
G. A. M.
, “
Direct In Vitro Measurement of Forces in Cruciate Ligaments. Part II: The Effect of Section of the Posterolateral Structures
,”
J. Bone Joint Surg.
, Vol.
75A
,
1993
, pp.
387
–
394
.
18.
Norwood
L. A.
, and
Cross
M. J.
, “
Anterior Cruciate Ligament: Functional Anatomy of Its Bundles in Rotatory Instabilities
,”
Am. J. Sports Med.
, Vol.
7
,
1979
, pp.
23
–
26
.
19.
Paul, R. P., Robot Manipulators: Mathematics, Programming, and Control, The MIT Press, Cambridge, MA, 1981, pp. 217–220.
20.
Sidles
J. A.
,
Larson
R. V.
,
Garbini
J. L.
,
Downey
D. J.
, and
Matsen
F. A.
, “
Ligament Length Relationships in the Moving Knee
,”
J. Orthop. Res.
, Vol.
6
,
1988
, pp.
593
–
610
.
21.
Takai
S.
,
Woo
S. L.-Y.
,
Livesay
G. A.
,
Adams
D. J.
, and
Fu
F. H.
, “
Determination of the In-Situ Loads on the Human Anterior Cruciate Ligament
,”
J. Orthop. Res.
, Vol.
11
,
1993
, pp.
686
–
695
.
22.
Vahey
J. W.
, and
Draganich
L. F.
, “
Tensions in the Anterior and Posterior Cruciate Ligaments of the Knee During Passive Loading: Predicting the Ligament Loads from In-Situ Measurements
,”
J. Orthop. Res.
, Vol.
9
,
1991
, pp.
529
–
538
.
23.
Wascher
D. C.
,
Markolf
K. L.
,
Shapiro
M. S.
, and
Finerman
G. A. M.
, “
Direct In Vitro Measurement of the Forces in Cruciate Ligaments. Part 1: The Effect of Multiplane Loading in the Intact Knee
,”
J. Bone Joint Surg.
, Vol.
75A
,
1993
, pp.
377
–
386
.
This content is only available via PDF.
Copyright © 1995
 by The American Society of Mechanical Engineers
You do not currently have access to this content.