We derive a cellular solids approach to the design of bone scaffolds for stiffness and pore size. Specifically, we focus on scaffolds made of stacked, alternating, orthogonal layers of hydroxyapatite rods, such as those obtained via micro-robotic deposition, and aim to determine the rod diameter, spacing and overlap required to obtain specified elastic moduli and pore size. To validate and calibrate the cellular solids model, we employ a finite element model and determine the effective scaffold moduli via numerical homogenization. In order to perform an efficient, automated execution of the numerical studies, we employ a geometry projection method so that analyses corresponding to different scaffold dimensions can be performed on a fixed, non-conforming mesh. Based on the developed model, we provide design charts to aid in the selection of rod diameter, spacing and overlap to be used in the robotic deposition to attain desired elastic moduli and pore size.
Issue Section:
Research Papers
Keywords:
bioceramics,
bone,
calcium compounds,
calibration,
cellular biophysics,
materials preparation,
mesh generation,
porosity,
tissue engineering,
Young's modulus,
tissue engineering,
bone scaffolds,
cellular solids,
geometry projection,
numerical homogenization,
micro-robotic deposition
Topics:
Bone,
Calibration,
Design,
Geometry,
Porosity,
Solids,
Stiffness,
Computer simulation,
Rods,
Robotics,
Dimensions,
Finite element model
References
1.
Suzuki
, O.
, Imaizumi
, H.
, Kamakura
, S.
, and Katagiri
, T.
, 2008, “Bone Regeneration by Synthetic Octacalcium Phosphate and its Role in Biological Mineralization
,” Curr. Med. Chem.
, 15
(3
), pp. 305
–313
. 2.
Zhang
, F.
, Xia
, Y.
, Xu
, L.
, and Gu
, N.
, 2008, “Surface Modification and Microstructure of Single-Walled Carbon Nanotubes for Dental Resin-Based Composites
”. J. Biomed. Mater. Res., Part B: Appl. Biomater.
, 86
(1
), pp. 90
–97
. 3.
Manjubala
, I.
, Sastry
, T.
, and Kumar
, R.
, 2005, “Bone In-Growth Induced by Biphasic Calcium Phosphate Ceramic in Femoral Defect of Dogs
,” J. Biomater. Appl.
, 19
(4
), p. 341
. 4.
Cao
, W.
, and Hench
, L. L.
, 1996, “Bioactive Materials
,” Ceram. Int.
, 22
, pp. 493
–507
. 5.
U.S. Census Bureau
, 2011, Health and Nutrition. Statistical Abstracts of the United States
, U.S. Government Printing Office
.6.
Jahangir
, A.
, Nunley
, R.
, Mehta
, S.
, Alok
, S.
, and Washington Health Policy Fellows,, 2008, “Bone Graft Substitutes in Orthopaedic Surgery
,” J. Am. Acad. Orthop. Surg.
, 2
(1
), pp. 35
–37
.7.
U.S. Census Bureau
, 2011, Population. Statistical Abstracts of the United States
, U.S. Government Printing Office
.8.
Khan
, Y.
, Yaszemski
, M.
, Mikos
, A.
, and Laurencin
, C.
, 2008, “Tissue Engineering of Bone: Material and Matrix Considerations
,” J. Bone Jt. Surg.
, 90
(1
), p. 36
. 9.
LeGeros
, R.
, 2008, “Calcium Phosphate-Based Osteoinductive Materials
,” Chem. Rev.
, 108
(11
), pp. 4742
–4753
. 10.
Habibovic
, P.
, and de Groot
, K.
, 2007, “Osteoinductive Biomaterials-Properties and Relevance in Bone Repair
,” J. Tissue Eng. Regener. Med.
, 1
(1
), pp. 25
–32
. 11.
Mistry
, A.
, and Mikos
, A.
, 2005, “Tissue engineering strategies for bone regeneration
,” Regenerative Medicine II: Clinical and Preclinical Applications
, Yannis
, I.
, ed. (Advances in Biochemical Engineering/Biotechnology). Springer-Verlag Berlin Heidelberg
, Vol. 94
, Chap. 1, pp. 1
–22
.12.
Silber
, J.
, Anderson
, D.
, Daffner
, S.
, Brislin
, B.
, Leland
, J.
, Hilibrand
, A.
, Vaccaro
, A.
, and Albert
, T.
, 2003, “Donor Site Morbidity After Anterior Iliac Crest Bone Harvest for Single-Level Anterior Cervical Discectomy and Fusion
,” Spine
, 28
(2
), p. 134
. 13.
Betz
, R.
, 2002, “Limitations of Autograft and Allograft: New Synthetic Solutions
,” Orthopedics
, 25
(5
), p. s561
.14.
Wheeler
, D.
, and Enneking
, W.
, 2005, “Allograft Bone Decreases in Strength In Vivo Over Time
,” Clin. Orthop. Relat. Res.
, 435
, p. 36
. 15.
Hollister
, S.
, 2005, “Porous Scaffold Design for Tissue Engineering
,” Nature Mater.
, 4
(7
), pp. 518
–524
. 16.
Reichert
, J.
, and Hutmacher
, D.
, 2011, “Bone Tissue Engineering
,” Tissue Engineering: From Lab to Clinic
, N.
Pallua
and C.
Suscheck
, eds., Springer
, New York
.17.
Karageorgiou
, V.
, and Kaplan
, D.
, 2005, “Porosity of 3D Biomaterial Scaffolds and Osteogenesis
,” Biomaterials
, 26
(27
), pp. 5474
–5491
. 18.
O’Brien
, F.
, Harley
, B.
, Waller
, M.
, Yannas
, I.
, Gibson
, L.
, and Prendergast
, P.
, 2007, “The Effect of Pore Size on Permeability and Cell Attachment in Collagen Scaffolds for Tissue engineering
,” Technol. Health Care
, 15
(1
), pp. 3
–17
.19.
Sigmund
, O.
, 2002, “On the Optimality of Bone Microstructure
,” IUTAM Symposium on Synthesis in Bio Solid Mechanics
, Springer
, New York
, pp. 221
–234
.20.
Hollister
, S.
, Liao
, E.
, Moffitt
, E.
, Jeong
, C.
, and Kemppainen
, J.
, 2011, “Defining Design Targets for Tissue Engineering Scaffolds
”. Tissue Engineering: From Lab to Clinic
, N.
Pallua
and C.
Suscheck
, eds., Springer
, New York
.21.
Lewis
, J.
, 2006, “Direct Ink Writing of 3d Functional Materials
,” v. Funct. Mater.
, 16
(17
), pp. 2193
–2204
. 22.
Miranda
, P.
, Pajares
, A.
, Saiz
, E.
, Tomsia
, A.
, and Guiberteau
, F.
, 2008, “Mechanical Properties of Calcium Phosphate Scaffolds Fabricated by Robocasting
,” J. Biomed. Mater. Res. Part A
, 85
(1
), pp. 218
–227
. 23.
Miranda
, P.
, Pajares
, A.
, and Guiberteau
, F.
, 2008, “Finite Element Modeling as a Tool for Predicting the Fracture Behavior of Robocast Scaffolds
,” Acta Biomater.
, 4
(6
), pp. 1715
–1724
. 24.
Cordell
, J.
, Vogl
, M.
, and Wagoner Johnson
, A.
, 2009, “The Influence of Micropore Size on the Mechanical Properties of Bulk Hydroxyapatite and Hydroxyapatite Scaffolds
,” J. Mech. Behav. Biomed. Mater.
, 2
(5
), pp. 560
–570
. 25.
Smay
, J. E.
, Cesarano
III, J.
, and Lewis
, J. A.
, 2002, “Colloidal Inks for Directed Assembly of 3-D Periodic Structures
,” Langmuir
, 18
(14
), pp. 5429
–5437
. 26.
Hoelzle
, D.
, Alleyne
, A.
, and Wagoner
, J.
, 2008, “Micro-Robotic Deposition Guidelines by a Design of Experiments Approach to Maximize Fabrication Reliability for the Bone Scaffold Application
,” Acta Biomater.
, 4
(4
), p. 897
. 27.
Lan Levengood
, S.
, Polak
, S.
, Poellmann
, M.
, Hoelzle
, D.
, Maki
, A.
, Clark
, S. G.
, Wheeler
, M. B.
, and Wagoner Johnson
, A. J.
, 2010, “The Effect of BMP-2 on Micro and Macroscale Osteointegration of Biphasic Calcium Phosphate Scaffolds with Multiscale Porosity
,” Acta Biomater.
, 6
(8
), pp. 3283
–3291
. 28.
Lan Levengood
, S.
, Polak
, S.
, Wheeler
, M. B.
, Maki
, A.
, Clark
, S. G.
, Jamison
, R.
, and Wagoner Johnson
, A. J.
, 2010, “Multiscale Osteointegration as a New Paradigm for Bone Scaffold Design
,” Biomaterials
, 31
, pp. 3552
–3563
. 29.
Polak
, S.
, Levengood
, S.
, Wheeler
, M.
, Maki
, A.
, Clark
, S.
, and Johnson
, A.
, 2010, “Analysis of the Roles of Microporosity and BMP-2 on Multiple Measures of Bone Regeneration and Healing in Calcium Phosphate Scaffolds
,” Acta Biomaterialia
, 7
(4
), pp. 1760
–1771
.30.
Woodard
, J.
, Hilldore
, A.
, Lan
, S.
, Park
, C.
, Morgan
, A.
, Eurell
, J.
, Clark
, S.
, Wheeler
, M.
, Jamison
, R.
, and Wagoner Johnson
, A.
, 2007. “The Mechanical Properties and Osteoconductivity of Hydroxyapatite Bone Scaffolds with Multi-Scale Porosity
,” Biomaterials
, 28
(1
), pp. 45
–54
. 31.
Schek
, R.
, Wilke
, E.
, Hollister
, S.
, and Krebsbach
, P.
, 2006, “Combined Use of Designed Scaffolds and Adenoviral Gene Therapy for Skeletal Tissue Engineering
,” Biomaterials
, 27
(7
), pp. 1160
–1166
. 32.
LeGeros
, R.
, 2002, “Properties of Osteoconductive Biomaterials: Calcium Phosphates
,” Clin. Orthop. Relat. Res.
, 395
, p. 81
. 33.
Hing
, K.
, 2005, “Bioceramic Bone Graft Substitutes: Influence of Porosity and Chemistry
,” International Journal of Applied Ceramic Technology
, 2
(3
), pp. 184
–199
. 34.
Damien
, C.
, and Parsons
, J.
, 1991, “Bone Graft and Bone Graft Substitutes: A Review of Current Technology and Applications
,” Journal of Applied Biomaterials
, 2
(3
), pp. 187
–208
. 35.
Valentini
, P.
, Abensur
, D.
, Wenz
, B.
, Peetz
, M.
, and Schenk
, R.
, 2000, “Sinus Grafting with Porous Bone Mineral (Bio-Oss) for Implant Placement: A 5-year study on 15 Patients
,” Int. J. Periodontics Restorative Dent.
, 20
(3
), p. 245
.36.
Le Guehennec
, L.
, Soueidan
, A.
, Layrolle
, P.
, and Amouriq
, Y.
, 2007, “Surface Treatments of Titanium Dental Implants for Rapid Osseointegration
,” Dent. Mater.
, 23
(7
), pp. 844
–854
. 37.
Cahill
, S.
, Lohfeld
, S.
, and McHugh
, P.
, 2009, “Finite Element Predictions Compared to Experimental Results for the Effective Modulus of Bone Tissue Engineering Scaffolds Fabricated by Selective Laser Sintering
,” J. Mater. Sci.: Mater. Med.
, 20
(6
), pp. 1255
–1262
. 38.
Charriere
, E.
, Lemaitre
, J.
, and Zysset
, P.
, 2003, “Hydroxyapatite Cement Scaffolds with Controlled Macroporosity: Fabrication Protocol and Mechanical Properties
,” Biomaterials
, 24
(5
), pp. 809
–817
. 39.
McIntosh
, L.
, Cordell
, J.
, and Wagoner
, J.
, 2009, “Impact of Bone Geometry on Effective Properties of Bone Scaffolds
,” Acta Biomater.
, 5
(2
), p. 680
. 40.
Hollister
, S.
, Levy
, R.
, Chu
, T.
, Halloran
, J.
, and Feinberg
, S.
, 2000, “An Image-Based Approach for Designing and Manufacturing Craniofacial Scaffolds
,” Int. J. Oral Maxillofac Surg.
, 29
(1
), pp. 67
–71
. 41.
Williams
, J.
, Adewunmi
, A.
, Schek
, R.
, Flanagan
, C.
, Krebsbach
, P.
, Feinberg
, S.
, Hollister
, S.
, and Das
, S.
, 2005, “Bone Tissue Engineering Using Polycaprolactone Scaffolds Fabricated via Selective Laser Sintering
,” Biomaterials
, 26
(23
), pp. 4817
–4827
. 42.
Hollister
, S.
, Lin
, C.
, Saito
, E.
Schek
, R.
, Taboas
, J.
, Williams
, J.
, Partee
, B.
, Flanagan
, C.
, Diggs
, A.
,Wilke
, E.
, Van Lenthe
, G. H.
, Müller
, R.
, Wirtz
, T.
, Das
, S.
, Feinberg
, S. E.
, and Krebsbach
, P. H.
, 2005, “Engineering Craniofacial Scaffolds
,” Orthod. Craniofacial Res.
, 8
(3
), pp. 162
–173
. 43.
Hollister
, S.
, Maddox
, R.
, and Taboas
, J.
, 2002, “Optimal Design and Fabrication of Scaffolds to Mimic Tissue Properties and Satisfy Biological Constraints
,” Biomaterials
, 23
(20
), pp. 4095
–4103
. 44.
Lin
, C.
, Kikuchi
, N.
, and Hollister
, S.
, 2004, “A Novel Method for Biomaterial Scaffold Internal Architecture Design to Match Bone Elastic Properties with Desired Porosity
,” J. Biomech.
, 37
(5
), pp. 623
–636
. 45.
Hollister
, S.
, and Lin
, C.
, 2007, “Computational Design of Tissue Engineering Scaffolds
,” Comput. Methods Appl. Mech. Eng.
, 196
(31-32
), pp. 2991
–2998
. 46.
Gibson
, L.
, and Ashby
, M.
, 1999, Cellular Solids:Structure and Properties
. Cambridge University Press
, London
47.
Muskhelishvili
, N.
, 1977, Some Basic Problems of the Mathematical Theory of Elasticity
, Springer
, New York
.48.
Puttock
, M.
, and Thwaite
, E.
, 1969, Elastic Compression of Spheres and Cylinders at Point and Line Contact
, Commonwealth Scientific and Industrial Research Organization
.49.
Beyer
, W.
, Fawcett
, L.
, Hartem
, L.
, and Swartz
, B.
, 1992, “The Volume Common to Two Congruent Circular Cylinders
,” J. Symb. Comput.
, 13
(2
), pp. 221
–230
. 50.
Norato
, J.
, Haber
, R.
, Tortorelli
, D.
, and Bendsøe
, M.
, 2004, “A Geometry Projection Method for Shape Optimization
,” Int. J. Numer. Methods Eng.
, 60
(14
), pp. 2289
–2312
. 51.
Bendsøe
, M.
, and Sigmund
, O.
, 2003, Topology Optimization: Theory, Methods, and Applications
, Springer Verlag
, Berlin
.52.
Park
, J.
, and Lakes
, R.
, 2007, Biomaterials: An Introduction.
Springer
, New York
.53.
Katz
, J.
, and Ukraincik
, K.
, 1971, “On the Anisotropic Elastic Properties of Hydroxyapatite
,” J.Biomech.
, 4
(3
), pp. 221
–227
. 54.
Prokopiev
, O.
, and Sevostianov
, I.
, 2006, “Dependence of the Mechanical Properties of Sintered Hydroxyapatite on the Sintering Temperature
,” Mater. Sci. Eng., A
, 431
(1-2
), pp. 218
–227
. 55.
Bangerth
, W.
, Hartmann
, R.
, and Kanschat
, G.
, 2007, “Deal.II – A General Purpose Object Oriented Finite Element Library
,” ACM Trans. Math. Softw.
, 33
(4
), pp. 24/1
–24/27
. 56.
Dalcin
, L.
, 2010, MPI for Python, Release 1.2.2
.57.
The Scilab Consortium, 2010,
Scilab Manual, 5.3.0
. See also: http://help.scilab.org/http://help.scilab.org/.58.
Michna
, S.
, Wu
, W.
, and Lewis
, J.
, 2005, “Concentrated Hydroxyapatite Inks for Direct-Write Assembly of 3-D Periodic Scaffolds
,” Biomaterials
, 26
(28
), pp. 5632
–5639
. 59.
Nordson Engineered Fluid Dispensing, 2006,
Ultra™ fluid dispensing systems and dispensing components (Price List)
.Copyright © 2011
by American Society of Mechanical Engineers
You do not currently have access to this content.
