This paper presents a dynamic analysis method for robotic integration of tooling systems. This development is motivated by the fact that many modern robotic automation tasks require large and heavy tooling systems. Yet, the integration of these tooling systems is usually done only considering the geometric constraints and weights without resorting to dynamic analysis. To resolve this problem, the equations of motion of a robot with inclusion of a tooling system are derived using the Lagrangian formulation. Three performance indices are introduced to evaluate the influence of the tooling system on the overall dynamics. The first index measures the energy consumption due to the tooling system’s motion, the second index evaluates the influence of the tooling system on the fundamental frequency, and the third one is the dynamic manipulability ellipsoid to measure the acceleration capability of the tool tip. Simulation studies are carried out to provide guidelines for the design of tooling systems. To demonstrate its effectiveness, the proposed method is applied to facilitate the tooling integration used in the robotic riveting for aerospace assembly.
Skip Nav Destination
e-mail: yuwen.li@mail.mcgill.ca
e-mail: fengxi@ryerson.ca
e-mail: r3mohame@ryerson.ca
e-mail: kbehdina@ryerson.ca
Article navigation
July 2011
Research Papers
Dynamic Analysis for Robotic Integration of Tooling Systems
Yuwen Li,
Yuwen Li
Postdoctoral Fellow
Department of Aerospace Engineering,
e-mail: yuwen.li@mail.mcgill.ca
Ryerson University
, Toronto, ON, M5B 2K3, Canada
Search for other works by this author on:
Jeff Xi,
Jeff Xi
Professor
Department of Aerospace Engineering,
e-mail: fengxi@ryerson.ca
Ryerson University
, Toronto, ON, M5B 2K3, Canada
Search for other works by this author on:
Richard Phillip Mohamed,
Richard Phillip Mohamed
Department of Aerospace Engineering,
e-mail: r3mohame@ryerson.ca
Ryerson University
, Toronto, ON, M5B 2K3, Canada
Search for other works by this author on:
Kamran Behdinan
Kamran Behdinan
Professor
Department of Aerospace Engineering,
e-mail: kbehdina@ryerson.ca
Ryerson University
, Toronto, ON, M5B 2K3, Canada
Search for other works by this author on:
Yuwen Li
Postdoctoral Fellow
Department of Aerospace Engineering,
Ryerson University
, Toronto, ON, M5B 2K3, Canadae-mail: yuwen.li@mail.mcgill.ca
Jeff Xi
Professor
Department of Aerospace Engineering,
Ryerson University
, Toronto, ON, M5B 2K3, Canadae-mail: fengxi@ryerson.ca
Richard Phillip Mohamed
Department of Aerospace Engineering,
Ryerson University
, Toronto, ON, M5B 2K3, Canadae-mail: r3mohame@ryerson.ca
Kamran Behdinan
Professor
Department of Aerospace Engineering,
Ryerson University
, Toronto, ON, M5B 2K3, Canadae-mail: kbehdina@ryerson.ca
J. Dyn. Sys., Meas., Control. Jul 2011, 133(4): 041002 (8 pages)
Published Online: April 6, 2011
Article history
Received:
January 23, 2010
Revised:
October 23, 2010
Online:
April 6, 2011
Published:
April 6, 2011
Citation
Li, Y., Xi, J., Mohamed, R. P., and Behdinan, K. (April 6, 2011). "Dynamic Analysis for Robotic Integration of Tooling Systems." ASME. J. Dyn. Sys., Meas., Control. July 2011; 133(4): 041002. https://doi.org/10.1115/1.4003375
Download citation file:
Get Email Alerts
Cited By
Offline and Online Exergy-Based Strategies for Hybrid Electric Vehicles
J. Dyn. Sys., Meas., Control (May 2025)
Multi Combustor Turbine Engine Acceleration Process Control Law Design
J. Dyn. Sys., Meas., Control
A Distributed Layered Planning and Control Algorithm for Teams of Quadrupedal Robots: An Obstacle-Aware Nonlinear Model Predictive Control Approach
J. Dyn. Sys., Meas., Control (May 2025)
Active Data-Enabled Robot Learning of Elastic Workpiece Interactions
J. Dyn. Sys., Meas., Control (May 2025)
Related Articles
Dynamic Modeling and Analysis of a Circular Track-Guided Tripod
J. Comput. Nonlinear Dynam (January,2010)
Process Parameter Optimization of a Mobile Robotic Percussive Riveting System With Flexible Joints
J. Comput. Nonlinear Dynam (November,2017)
Underwater Robots: Motion and Force Control of Vehicle-Manipulator Systems. Springer Tracts in Advanced Robotics, Vol 2
Appl. Mech. Rev (November,2003)
A Locking Compliant Device Inspired by the Anatomy of the Spine
J. Mech. Des (January,2009)
Related Proceedings Papers
Related Chapters
Time-Varying Coefficient Aided MM Scheme
Robot Manipulator Redundancy Resolution
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution
Smart Control for Collective Agents by Adaptive Strategic Mechanism
Intelligent Engineering Systems through Artificial Neural Networks Volume 18