Radioactive Marker Technique (RMT), an in-situ method to measure reservoir rock compaction and to evaluate uniaxial compressibility coefficients is examined here. Recent field applications seems to confirm that RMT-derived match with sufficient precision with those calculated from land subsidence observed over the field by means of geodetic surveys, but are not always in good agreement with those derived from lab measurements. In particular, here is reported an application of RMT in the Italian Adriatic offshore, which highlights the discrepancies of measurements from lab and RMT. At present, these discrepancies aren’t thoroughly understood, so, from an applicative standpoint, it is still necessary to perform a critical comparison and integration between both set of data.
Skip Nav Destination
e-mail: paolo.macini@mail.ing.unibo.it
e-mail: ezio.mesini@mail.ing.unibo.it
Article navigation
December 2002
Technical Papers
Measuring Reservoir Compaction Through Radioactive Marker Technique
Paolo Macini,
e-mail: paolo.macini@mail.ing.unibo.it
Paolo Macini
Dept. of Chemical, Mining & Environmental Engineering, University of Bologna, Viale del Risorgimento, 2, Bologna 40136 Italy
Search for other works by this author on:
Ezio Mesini
e-mail: ezio.mesini@mail.ing.unibo.it
Ezio Mesini
Dept. of Chemical, Mining & Environmental Engineering, University of Bologna, Viale del Risorgimento, 2, Bologna 40136 Italy
Search for other works by this author on:
Paolo Macini
Dept. of Chemical, Mining & Environmental Engineering, University of Bologna, Viale del Risorgimento, 2, Bologna 40136 Italy
e-mail: paolo.macini@mail.ing.unibo.it
Ezio Mesini
Dept. of Chemical, Mining & Environmental Engineering, University of Bologna, Viale del Risorgimento, 2, Bologna 40136 Italy
e-mail: ezio.mesini@mail.ing.unibo.it
Contributed by the Petroleum Division for publication in the JOURNAL OF ENERGY RESOURCES TECHNOLOGY. Manuscript received by the Petroleum Division; Sept. 2001; revised manuscript received May 2002. Associate Editor: A. Wojtanowicz.
J. Energy Resour. Technol. Dec 2002, 124(4): 269-275 (7 pages)
Published Online: November 20, 2002
Article history
Received:
September 1, 2001
Revised:
May 1, 2002
Online:
November 20, 2002
Citation
Macini, P., and Mesini, E. (November 20, 2002). "Measuring Reservoir Compaction Through Radioactive Marker Technique ." ASME. J. Energy Resour. Technol. December 2002; 124(4): 269–275. https://doi.org/10.1115/1.1506700
Download citation file:
Get Email Alerts
Cited By
Related Articles
Compaction Performance of Geopressured-Geothermal Reservoir Rock
J. Energy Resour. Technol (September,1988)
A Novel Model for Well Production Performance Estimate in Low-Permeability and Tight Reservoirs Considering Stress Sensitivity
J. Energy Resour. Technol (September,2020)
Elastic-Plastic Compaction of Geopressured Sandstone
J. Energy Resour. Technol (March,1991)
A Nonlinear Compaction Model for Sandstone
J. Energy Resour. Technol (June,1986)
Related Proceedings Papers
Related Chapters
Typical Example of Lateral Rock Spreading in Three Gorges Reservoir Area
Geological Engineering: Proceedings of the 1 st International Conference (ICGE 2007)
Intuitive Optimization
Engineering Optimization: Applications, Methods, and Analysis
Study and Construction of Experiment Table of Drilling at Any Position of Rock Sample
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)