... planar configuration power-law fluid instability heat transfer mass transfer University Grants Commission 10.13039/501100001501 Ref No.: 1274/(CSIR-UGC NET JUNE 2019) The Rayleigh–Taylor (RT) instability occurs in the scenario when a fluid of heavier density floats on top...

... that the ice accretes in a direction normal to the airfoil surface. The governing Reynolds-averaged Navier–Stokes (RANS) conservation equations along with the energy and continuity equations are solved to produce the velocity and temperature fields. A convective film heat transfer coefficient is computed based...

... and heat transfer. An adopted turbulence model was validated through an experiment as described in the literature. Numerical results of pressure coefficient and Nusselt number were obtained for cases with and without filet profiles for variable jet Reynolds numbers and conical angles. Results showed...

...S. Dholey The combined influence of normal transpiration and tangential movement of a porous surface on the unsteady separated stagnation-point flow and heat transfer of a viscous fluid is studied. This study is based on five physical parameters, namely (i) flow strength parameter a, (ii) suction...

... 1.253850 1.252881 5.0 1.292828 1.292593 1.292352 1.292106 1.291727 The flow and heat transfer characteristics of Powell–Eyring fluid over a stretching surface with variable surface temperature were investigated. Symmetries of equations are determined through Lie group analysis...

... directions in a flow with 60 ≤ Re ≤ 250 . They set structural damping coefficient equal to zero and studied lock-in phenomenon in their work. Despite numerous works, which have studied flow field around vibrating cylinders, far fewer works have focused on the heat transfer process from them...

... Zhou. 14 12 2011 16 07 2012 In this paper, we investigate the influence of temperature-dependent fluid properties on the flow and heat transfer characteristics of an electrically conducting dusty fluid over a stretching sheet. Temperature-dependent fluid properties are assumed...

... evaluation for the Nusselt number compared to the perturbation method is achieved. 01 02 2012 20 06 2012 27 07 2012 27 07 2012 partial differential equations channel flows non-Newtonian fluids heat transfer homotopy analysis method Studies of channel flows have been...

... rotor revealed the presence of negative fluid stiffness that was monotonically related to both flow and speed. Finally, conjugate heat transfer analysis predicted temperature rise adjacent to the motor to be inversely proportional to the length, but not exceeding ∼2 °C over the intended range...

..., the consistency of the pressure curves obtained in experimental and simulation tests proves the implemented tube model to be useful for the calculations of pneumatic system dynamics. 10 03 2011 04 10 2011 23 12 2011 23 12 2011 flow simulation heat transfer Navier-Stokes equations...

... for flat plate, channel, and pipe flow boundary layers. Turbulence budgets revealed a strong Sc dependence of turbulent scalar transport. 03 02 2011 02 07 2011 23 08 2011 23 08 2011 external flows flow simulation heat transfer mass transfer numerical analysis rotational...

... total References 1 Chiou , J. P. , 1978 , “ Thermal Performance Deterioration in Crossflow Heat Exchanger Due to the Flow Nonuniformity ,” ASME J. Heat Transfer , 100 , pp. 580 – 587 . 10.1115/1.3450860 2 Shah , R. K. , and London , A. L. , 1980 , “ Effects...

..., and the bubble pump performance is improved when the tube diameter increases. 10 08 2010 31 01 2011 15 03 2011 15 03 2011 ammonia bubbles flow simulation heat transfer mixing pattern formation pumps two-phase flow water bubble pump flow pattern void fraction...

... parameters. A comparison of the present results with the existing numerical solution is discussed in a limiting sense. 12 11 2010 19 01 2011 22 02 2011 22 02 2011 convergence of numerical methods flow simulation heat transfer microfluidics nonlinear differential equations...

... for the acquisition procedure and computerized data processing. 29 03 2010 12 11 2010 22 12 2010 22 12 2010 flow measurement heat transfer laminar flow microchannel flow Designing microfluidic devices and systems calls for a knowledge of component flow conductance ( 1 2 3 4...

... in internal flow channels to increase heat transfer augmentation through high turbulence and increased surface area. The flow fields in these obstructed channels are difficult to predict, so these measurements can be used to directly compare with predicted drag and lift forces. Figure 15 shows...

... of the jet. In addition to the computational approach, a number of analytical solutions are presented and compared with the computational results. 22 12 2009 16 06 2010 16 08 2010 16 08 2010 heat transfer jets pattern formation pipe flow Secondary flows are generated...

... static pressure variation with the distance along the chamber length is measured and calculated at different Reynolds numbers and inlet flow angles. The average heat transfer with Reynolds number at different values of the inlet flow angle is obtained. The velocity vectors are presented and Reynolds...

... Plumes ,” Numer. Heat Transfer, Part A 1040-7782 , 43 , pp. 731 – 751 . 10.1080/713838127 Sangras , R. , Dai , Z. and Faeth , G. M. , 1998 , “ Mixing Structure of Plane Self-Preserving Buoyant Turbulent Plumes ,” Appendix to the NIST Report No. NIST GCR 99-769, pp. 66 – 102...

... characteristics for different values of Prandtl number (Pr), local Grashof number Gr x , and local convective heat transfer parameter Bi x are graphed and tabulated. A comparison with previously published results on special case of the problem shows excellent agreement. 23 12 2009 30 01 2010 16 04...