Skip Nav Destination
Issues
May 2017
ISSN 0742-4795
EISSN 1528-8919
In this Issue
Research Papers
Gas Turbines: Aircraft Engine
Experimental Validation of the Aerodynamic Characteristics of an Aero-engine Intercooler
J. Eng. Gas Turbines Power. May 2017, 139(5): 051201.
doi: https://doi.org/10.1115/1.4034964
Topics:
Computational fluid dynamics
,
Ducts
,
Flow (Dynamics)
,
Inflow
,
Pressure
,
Porous materials
,
Aircraft engines
,
Pressure measurement
,
Heat exchangers
,
Outflow
Industrial Gas Turbine Health and Performance Assessment With Field Data
J. Eng. Gas Turbines Power. May 2017, 139(5): 051202.
doi: https://doi.org/10.1115/1.4034986
Topics:
Compressors
,
Engines
,
Power stations
,
Stress
,
Turbines
,
Gas turbines
,
Heat
,
Economic analysis
Gas Turbines: Coal, Biomass, and Alternative Fuels
Transient Performance Analysis of an Industrial Gas Turbine Operating on Low-Calorific Fuels
J. Eng. Gas Turbines Power. May 2017, 139(5): 051401.
doi: https://doi.org/10.1115/1.4034942
Topics:
Combustion chambers
,
Design
,
Engines
,
Flow (Dynamics)
,
Fuels
,
Gas turbines
,
Modeling
,
Rotors
,
Steady state
,
Stress
Gas Turbines: Combustion, Fuels, and Emissions
Effect of Ambient Temperature and Humidity on Combustion and Emissions of a Spark-Assisted Compression Ignition Engine
J. Eng. Gas Turbines Power. May 2017, 139(5): 051501.
doi: https://doi.org/10.1115/1.4034966
Topics:
Combustion
,
Emissions
,
Temperature
,
Homogeneous charge compression ignition engines
,
Ignition
,
Engines
Spatiotemporal Distribution of Soot Temperature for Flames Using Optical Pyrometry Under Unsteady Inlet Airflow Conditions
J. Eng. Gas Turbines Power. May 2017, 139(5): 051502.
doi: https://doi.org/10.1115/1.4034969
Topics:
Flames
,
Pyrometers
,
Temperature
,
Soot
,
Combustion
,
Calibration
Influence of Heat Transfer and Material Temperature on Combustion Instabilities in a Swirl Burner
J. Eng. Gas Turbines Power. May 2017, 139(5): 051503.
doi: https://doi.org/10.1115/1.4035143
Topics:
Combustion
,
Combustion chambers
,
Flow (Dynamics)
,
Heat transfer
,
Temperature
,
Flames
,
Heat losses
,
Boundary-value problems
Impact of a Cooled Cooling Air System on the External Aerodynamics of a Gas Turbine Combustion System
J. Eng. Gas Turbines Power. May 2017, 139(5): 051504.
doi: https://doi.org/10.1115/1.4035228
Topics:
Aerodynamics
,
Combustion chambers
,
Combustion systems
,
Cooling
,
Flow (Dynamics)
,
Pipes
,
Pressure
,
Gas turbines
,
Engines
,
Diffusers
Impact of Heat Release Distribution on the Spinning Modes of an Annular Combustor With Multiple Matrix Burners
J. Eng. Gas Turbines Power. May 2017, 139(5): 051505.
doi: https://doi.org/10.1115/1.4035207
Topics:
Combustion chambers
,
Flames
,
Heat
,
Limit cycles
,
Spin (Aerodynamics)
,
Spinning (Textile)
,
Fluctuations (Physics)
,
Pressure
,
Stability
,
Ejectors
Gas Turbines: Controls, Diagnostics, and Instrumentation
Experimental Study of Effusion Cooling With Pressure-Sensitive Paint
J. Eng. Gas Turbines Power. May 2017, 139(5): 051601.
doi: https://doi.org/10.1115/1.4034943
Topics:
Calibration
,
Computational fluid dynamics
,
Coolants
,
Cooling
,
Film cooling
,
Flow (Dynamics)
,
Pressure
,
Temperature
,
Geometry
,
Testing
Gas Turbines: Heat Transfer
Effect of Bolts on Flow and Heat Transfer in a Rotor–Stator Disk Cavity
J. Eng. Gas Turbines Power. May 2017, 139(5): 051901.
doi: https://doi.org/10.1115/1.4035144
Topics:
Cavities
,
Computational fluid dynamics
,
Disks
,
Flow (Dynamics)
,
Heat transfer
,
Rotors
,
Stators
,
Temperature
,
Wakes
,
Pressure
Gas Turbines: Manufacturing, Materials, and Metallurgy
Material Selection Issues for a Nozzle Guide Vane Against Service-Induced Failure
J. Eng. Gas Turbines Power. May 2017, 139(5): 052101.
doi: https://doi.org/10.1115/1.4035159
Topics:
Creep
,
Failure
,
Fatigue
,
Finite element methods
,
Nozzle guide vanes
,
Plasticity
,
Damage
,
Finite element model
,
Deformation
,
Fracture (Materials)
Gas Turbines: Oil and Gas Applications
An Innovative Method for the Evaluation of Particle Deposition Accounting for Rotor/Stator Interaction
J. Eng. Gas Turbines Power. May 2017, 139(5): 052401.
doi: https://doi.org/10.1115/1.4034968
Topics:
Blades
,
Particulate matter
,
Rotors
,
Stators
,
Compressors
Gas Turbines: Structures and Dynamics
Rigid Mode Vibration Control and Dynamic Behavior of Hybrid Foil–Magnetic Bearing Turbo Blower
J. Eng. Gas Turbines Power. May 2017, 139(5): 052501.
doi: https://doi.org/10.1115/1.4034920
Topics:
Bearings
,
Magnetic bearings
,
Rotors
,
Turbochargers
,
Vibration
,
Vibration control
,
Stiffness
,
Damping
,
Turbomachinery
,
Engines
Rotordynamic Computational and Experimental Characterization of a Convergent Honeycomb Seal Tested With Negative Preswirl, High Pressure With Static Eccentricity and Angular Misalignment
J. Eng. Gas Turbines Power. May 2017, 139(5): 052502.
doi: https://doi.org/10.1115/1.4034965
Topics:
Clearances (Engineering)
,
Computational fluid dynamics
,
Damping
,
Design
,
Geometry
,
High pressure (Physics)
,
Honeycomb structures
,
Pressure
,
Rotors
,
Stiffness
An Experimental Study of the Aerodynamic Forcing Function in a 1.5 Steam Turbine Stage
Giacomo Gatti, Paolo Gaetani, Berardo Paradiso, Vincenzo Dossena, Juri Bellucci, Lorenzo Arcangeli, Nicola Maceli
J. Eng. Gas Turbines Power. May 2017, 139(5): 052503.
doi: https://doi.org/10.1115/1.4034967
Topics:
Blades
,
Flow (Dynamics)
,
Pressure
,
Rotors
,
Stators
,
Turbines
,
Steam turbines
Modal Analysis Method for Blisks Based on Three-Dimensional Blade and Two-Dimensional Axisymmetric Disk Finite Element Model
J. Eng. Gas Turbines Power. May 2017, 139(5): 052504.
doi: https://doi.org/10.1115/1.4035142
Topics:
Blades
,
Disks
,
Displacement
Design and Calibration of a Full Scale Active Magnetic Bearing Based Test Facility for Investigating Rotordynamic Properties of Turbomachinery Seals in Multiphase Flow
J. Eng. Gas Turbines Power. May 2017, 139(5): 052505.
doi: https://doi.org/10.1115/1.4035176
Topics:
Calibration
,
Design
,
Manufacturing
,
Multiphase flow
,
Sensors
,
Test facilities
,
Turbomachinery
,
Flow (Dynamics)
,
Magnetic bearings
,
Pistons
Cooling Injection Effect on a Transonic Squealer Tip—Part I: Experimental Heat Transfer Results and CFD Validation
J. Eng. Gas Turbines Power. May 2017, 139(5): 052506.
doi: https://doi.org/10.1115/1.4035175
Topics:
Computational fluid dynamics
,
Cooling
,
Flow (Dynamics)
,
Heat transfer
,
Blades
,
Coolants
,
Heat transfer coefficients
,
Heat flux
,
Temperature
,
Suction
Cooling Injection Effect on a Transonic Squealer Tip—Part II: Analysis of Aerothermal Interaction Physics
J. Eng. Gas Turbines Power. May 2017, 139(5): 052507.
doi: https://doi.org/10.1115/1.4035200
Topics:
Cavities
,
Coolants
,
Cooling
,
Flow (Dynamics)
,
Heat transfer
,
Computational fluid dynamics
,
Vortex flow
Gas Turbines: Turbomachinery
Effect of Exit Pressure Pulsation on the Performance and Stability Limit of a Turbocharger Centrifugal Compressor
Maria Esperanza Barrera-Medrano, Peter Newton, Ricardo Martinez-Botas, Srithar Rajoo, Isao Tomita, Seiichi Ibaraki
J. Eng. Gas Turbines Power. May 2017, 139(5): 052601.
doi: https://doi.org/10.1115/1.4034689
Topics:
Compressors
,
Flow (Dynamics)
,
Pressure
,
Surges
,
Valves
,
Engines
,
Compression
,
Stability
,
Pulsatile flow
Entrance Aspect Ratio Effect on S-Duct Inlet Performance at High-Subsonic Flow
J. Eng. Gas Turbines Power. May 2017, 139(5): 052602.
doi: https://doi.org/10.1115/1.4035206
Topics:
Diffusers
,
Ducts
,
Flow (Dynamics)
,
Pressure
,
Computational fluid dynamics
Numerical and Experimental Investigation of Axial Gap Variation in High-Pressure Steam Turbine Stages
Juri Bellucci, Filippo Rubechini, Andrea Arnone, Lorenzo Arcangeli, Nicola Maceli, Berardo Paradiso, Giacomo Gatti
J. Eng. Gas Turbines Power. May 2017, 139(5): 052603.
doi: https://doi.org/10.1115/1.4035158
Topics:
Blades
,
Flow (Dynamics)
,
Pressure
,
Rotors
,
Turbines
,
Steam turbines
,
High pressure (Physics)
,
Stators
,
Computational fluid dynamics
A Computational and Experimental Compressor Design Project for Japanese and British High-School Students
J. Eng. Gas Turbines Power. May 2017, 139(5): 052604.
doi: https://doi.org/10.1115/1.4035208
Topics:
Design
,
Students
,
Compressors
,
Blades
Internal Combustion Engines
Research on Phase Synchronization Strategies for Diesel Engines to Startup Quickly
J. Eng. Gas Turbines Power. May 2017, 139(5): 052801.
doi: https://doi.org/10.1115/1.4035227
Topics:
Camshafts
,
Signals
,
Synchronization
,
Diesel engines
Technical Brief
A Method for Dynamic Analysis of Three-Dimensional Solid Element Rotors With Uncertain Parameters
J. Eng. Gas Turbines Power. May 2017, 139(5): 054501.
doi: https://doi.org/10.1115/1.4035049
Topics:
Rotors
,
Dynamic analysis
Email alerts
RSS Feeds
Hydrogen Thermal-Powered Aircraft Combustion and Propulsion System
J. Eng. Gas Turbines Power
Automatized Experimental Combustor Development Using Adaptive Surrogate Model-Based Optimization
J. Eng. Gas Turbines Power
Gaussian Stochastic Process Modeling of Blend Repaired Airfoil Modal Response Using Reduced Basis Mode Shape Approach
J. Eng. Gas Turbines Power (September 2022)
Off-Design Modelling and Operational Optimization of Trans-Critical Carbon Dioxide Heat Pumps
J. Eng. Gas Turbines Power