Pool boiling heat transfer has been extensively studied over decades, but the effect of boundary heating conditions on boiling received little attention. In this work, heat transfer coefficients during pool boiling of five different refrigerants (R123, R245fa, R236fa, R134a, and R22) on the outside surface of a smooth copper tube were measured at the saturation temperature of 6.7 °C; water flows inside the tube and provides heat to the refrigerants to boil (thus, water-heated boiling). Measurements showed that the refrigerant of a higher vapor pressure has a higher heat transfer coefficient, with the exception that R22 performs nearly the same as R134a. A correlation previously developed for electrically-heated pool boiling on cylindrical tubes underpredicts by 30%–46% the heat transfer coefficients during water-heated boiling of the five refrigerants. Among the pool boiling correlations reviewed in this work, the Cooper correlation (for pool boiling on cylindrical tubes) predicts the boiling heat transfer coefficients of R22 and R245fa reasonably well (within ±8.5%), but not as well those of the other three refrigerants (underpredicts by nearly 30% for R134a and R236fa and overpredicts by nearly 40% for R123). It is found that the predicted boiling heat transfer coefficients of the five refrigerants by the modified Gorenflo correlation (simply adding a constant multiplier of 1.47 to the Gorenflo correlation) are in excellent agreement with their respective measurements.
Skip Nav Destination
Article navigation
Research Papers
Water-Heated Pool Boiling of Different Refrigerants on the Outside Surface of a Horizontal Smooth Tube
Tailian Chen
Tailian Chen
Department of Mechanical Engineering,
Gonzaga University
, Spokane
, WA 99258-0026 e-mail:
Search for other works by this author on:
Tailian Chen
Department of Mechanical Engineering,
Gonzaga University
, Spokane
, WA 99258-0026 e-mail: J. Heat Transfer. Feb 2012, 134(2): 021502 (8 pages)
Published Online: December 13, 2011
Article history
Received:
December 24, 2010
Revised:
August 12, 2011
Online:
December 13, 2011
Published:
December 13, 2011
Citation
Chen, T. (December 13, 2011). "Water-Heated Pool Boiling of Different Refrigerants on the Outside Surface of a Horizontal Smooth Tube." ASME. J. Heat Transfer. February 2012; 134(2): 021502. https://doi.org/10.1115/1.4004902
Download citation file:
Get Email Alerts
Cited By
Estimation of thermal emission from mixture of CO2 and H2O gases and fly-ash particles
J. Heat Mass Transfer
Non-Classical Heat Transfer and Recent Progress
J. Heat Mass Transfer
Related Articles
Effect of CuO Nanoparticle Concentration on R134a/Lubricant Pool-Boiling Heat Transfer
J. Heat Transfer (April,2009)
Pool Boiling of R514A, R1224 yd(Z), and R1336mzz(E) on a Reentrant Cavity Surface
J. Heat Transfer (May,2021)
Local Pool Boiling Coefficients on the Outside Surface of a Horizontal Tube
J. Heat Transfer (August,2005)
Flow Boiling Characteristics for R1234ze(E) in 1.0 and 2.2 mm Circular Channels
J. Heat Transfer (February,2012)
Related Chapters
Conditions That Can Make an A/C System Unacceptable
Heat Exchanger Engineering Techniques
Liquid Cooled Systems
Thermal Management of Telecommunications Equipment
Thermal Design Guide of Liquid Cooled Systems
Thermal Design of Liquid Cooled Microelectronic Equipment