Experimental results are reported on the heat transfer and fluid friction of heated hydrogen and helium gas flows undergoing transition from turbulent to laminar flow in a circular tube. The entering Reynolds numbers range from 2350 to 12,500 and the nondimensional heat-flux parameter ranges from 0.0021 to 0.0061. Local heat-transfer coefficients and friction factors are obtained, and the flow transition, which is evident in these results, is verified at small heat fluxes by measuring directly the turbulence intensity at the center line with a hot-wire anemometer. At large heat fluxes, laminarization is found to occur at local bulk Reynolds numbers well in excess of the minimum number for fully turbulent adiabatic flow, and the resulting heat-transfer coefficients are much lower than those associated with fully turbulent flow at the same Reynolds number. The relation between laminarization in heated tubes and in severely accelerated external boundary layers is investigated and some similarities are noted. The acceleration and pressure-gradient parameters used to predict boundary-layer laminarization are modified for tube flow and used to correlate the initiation and completion of laminarization in the heated tube.
Skip Nav Destination
The Transition From Turbulent to Laminar Gas Flow in a Heated Pipe
C. A. Bankston
Los Alamos Scientific Laboratory, Los Alamos, N. M.
- Views Icon Views
- Share Icon Share
- Search Site
Bankston, C. A. (November 1, 1970). "The Transition From Turbulent to Laminar Gas Flow in a Heated Pipe." ASME. J. Heat Transfer. November 1970; 92(4): 569–579. https://doi.org/10.1115/1.3449726
Download citation file:
Get Email Alerts
Experimental Analysis of a Bayonet Tube at Constant Wall Temperature Conditions Under Laminar, Transition, and Turbulent Flow
J. Heat Mass Transfer (April 2023)
Flow and Convective Exchanges Study in Rotor-Stator System with Eccentric Impinging Jet
J. Heat Mass Transfer