...-dependent boundary conditions). As a result, the temperature distribution, position of the moving boundary and the velocity are evaluated and the results are validated. Crank, J., 1984, Free and Moving Boundary Problems , Clarendon Press, Oxford. Mennig , J. , and O¨zis¸ik , M. N. , 1985...

... to match the optimum condition. The complication involved in the heat and mass transfer with phase change is that the location of the moving phase boundary is unknown. This is important because at this moving boundary the heat transfer and mass transfer...

... is established to describe the ratio of the sintering penetration depth to the thermal penetration depth and its dependence upon the boundary and initial temperatures. sintering heat transfer thermal expansion shrinkage polymers powder technology Heat Transfer Materials Moving Boundaries...

... an expression for the temperature boundary condition at the moving flow front for this moving boundary mold filling process based on volume averaging method and verified it with experiments. The heat dispersion was found to vary linearly with Peclet number and contributed significantly to the temperature...

... of time. heat transfer pipe flow drag finite volume methods Heat Transfer Moving Boundaries Numerical Methods Spheres Transient Combination of the two cases presented above is of particular interest. This class of flow is a realistic model for heating and transport of particles...

... = 0.2 . The liquid region is chosen as the computational domain with its right moving boundary aligning with the interface location where T = 0 and g = 0.5 . Calculations were carried out using 5, 10, 20, and 40 uniformly deforming elements and a time-step of Δ t = 0.001...

... 1998 05 12 2007 Control Crystal Growth Heat Transfer Modeling Moving Boundaries Anselmo A. , Prasad V. , Koziol J. , and Gupta K. P. , 1993 , “ Oscillatory Convection in Low Aspect Ratio Czochraiski Melts ,” J. Crystal Growth , Vol. 134 , pp. 116 – 140...

.... This is the first time that a global high-pressure LEC model is able to account for convective flows and heat transfer and predict the interface shape and its dynamics. 01 May 1997 09 Mar 1998 05 12 2007 Materials Processing and Manufacturing Process Moving Boundaries Phase-Change Phenomena...

...: Control, Crystal Growth, Heat Transfer, Modeling, Moving Boundaries. Associate Technical Editor: C. Beckermann. Generally, the recirculating flow in the melt is caused and varied by a combination of four basic modes of convection: natural convection due to buoyancy force, Marangoni convection due...

... Transfer Division for publication in the JOURNAL OF HEAT TRANSFER. Manuscript received by the Heat Transfer Division, Nov. 12, 1996; revision received, Jan. 16, 1998. Keywords: Modeling and Scaling, Moving Boundaries, Phase-Change Phenomena. Associate Technical Editor: S. Ramadhy- ani. The equation...

.... Nelson D. J. , Vick B. , and Yu X. , 1996 , “ Validation of the Algorithm for Ice-on-Pipe Brine Thermal Storage Systems ,” ASHRAE Transactions , Vol. 102 , Part 1, pp. 55 – 62 . O’Neill K. , 1983 , “ Boundary Integral Equation Solution of Moving Boundary Phase Change Problems...

...- cessing and Manufacturing Process; Moving Boundaries, Associate Technical Editor: A. S. Lavine. droplet of typical dimensions, 1-10 mm (depending on plasma conditions), falls off the wire and onto the substrate, thereby building the material component. Another materials synthesis technology which utilizes...

... and Manufacturing Process Moving Boundaries Thermocapillary Flows Anthony T. R. , and Cline H. E. , 1977 , “ Surface Rippling Induced by Surface-Tension Gradien ts During Laser Surface Melting and Alloying ,” Journal of Applied Physics , Vol. 48 , pp. 3888 – 3894 . Arata Y...

... by the Heat Transfer Division for publication i the JOURNAL OF HEAT TRANSFER. Manuscript received by the Heat Transfer Division November 1994; revision received February 1996. Keywords: Jets, Moving Boundaries, Phase-Change Phenomena. Associate Technica! Editor: B. W. Webb. work to date on jet impingement...

...; revision received December 1995. Keywords: Condensation, Moving Boundaries, Porous Media. Associate Technical Editor: R. Viskanta. Theory In this section the analysis of Brouwers and Li (1994), con- cerning the one-dimensional longitudinal nd unsteady propaga- tion of the steam front, is recapitulated...

... Processes Moving Boundaries Phase-Change Phenomena 01 December 1994 01 October 1995 05 12 2007 X. Tong Student Mere. ASME J. A. Khan Mere, ASME Department of Mechanical Engineering, University of South Carolina, Columbia, SC 29208 Infiltration and Solidification/ Remelting of a Pure...

... Processing and Manufacturing Processes, Moving Boundaries. Associ- ate Technical Editor: Y. Bayazitoglu. f = friction factor h = heat transfer coefficient k = thermal conductivity Nu = Nusselt number p = pressure q = heat flux R = radius Re = Reynolds number = um2(Ro - R i ) /u S = c /Ro T = temperature u...

...C. K. Hsieh 01 September 1994 01 January 1995 23 01 2008 Conduction Materials Processing and Manufacturing Processes Moving Boundaries Crank, J., 1984, Free and Moving Boundary Problems , Clarendon, London. Erdelyi, A., 1953, Higher Transcendental Functions...

... theoretical results. 01 November 1993 01 July 1994 05 12 2007 Conjugate Heat Transfer Materials Processing and Manufacturing Processes Moving Boundaries Andrew, C., Howes, T. D., and Pearce, T. R. A., 1985, Creep Feed Grinding , Holt, Rinehart, and Winston, New York, pp. 12–15...

... into the critical mechanisms required for proper heat pipe operation. 01 June 1993 01 April 1994 05 12 2007 Heat Pipes and Thermosyphons Moving Boundaries Phase-Change Phenomena Adamson, A. W., 1990, Physical Chemistry of Surfaces , 5th ed., Wiley, Los Angeles, CA. Ayyaswamy...