A hologram registration method is developed for the laser holographic interferometry measurement of the 3D surface profile of objects which are larger than the field of view (FOV). The theory of laser holographic interferometry, including the phase-shifting and multiwavelength tuning, is described. The hologram registration without using targets is elaborated. The cross-correlation analysis is used to find the translation and overlapped regions, which determine the tilt and shift correction for data registration. The proposed method is validated using two examples with different approaches. The first example, a wheel hub, is smaller than the FOV and demonstrates only discrepancy of the surface flatness between the registered and standard measurements. The second example, an engine combustion deck surface, is larger than the FOV. The registered surface measurements are compared to that of coordinate measurement machine (CMM) with only 2.5% discrepancy of the peak-to-valley flatness. This data registration method enables the sub- precision and large depth of field (several centimeters) measurement of large size objects.
Skip Nav Destination
Article navigation
November 2006
Technical Papers
Laser Interferometry Hologram Registration for Three-Dimensional Precision Measurements
Zhenhua Huang,
Zhenhua Huang
Department of Mechanical Engineering,
University of Michigan
, Ann Arbor, MI 48109
Search for other works by this author on:
Albert J. Shih,
Albert J. Shih
Department of Mechanical Engineering,
University of Michigan
, Ann Arbor, MI 48109
Search for other works by this author on:
Jun Ni
Jun Ni
Department of Mechanical Engineering,
University of Michigan
, Ann Arbor, MI 48109
Search for other works by this author on:
Zhenhua Huang
Department of Mechanical Engineering,
University of Michigan
, Ann Arbor, MI 48109
Albert J. Shih
Department of Mechanical Engineering,
University of Michigan
, Ann Arbor, MI 48109
Jun Ni
Department of Mechanical Engineering,
University of Michigan
, Ann Arbor, MI 48109J. Manuf. Sci. Eng. Nov 2006, 128(4): 1006-1013 (8 pages)
Published Online: March 7, 2006
Article history
Received:
December 27, 2005
Revised:
March 7, 2006
Citation
Huang, Z., Shih, A. J., and Ni, J. (March 7, 2006). "Laser Interferometry Hologram Registration for Three-Dimensional Precision Measurements." ASME. J. Manuf. Sci. Eng. November 2006; 128(4): 1006–1013. https://doi.org/10.1115/1.2335856
Download citation file:
Get Email Alerts
Special Section: Manufacturing Science Engineering Conference 2024
J. Manuf. Sci. Eng (November 2024)
Anisotropy in Chip Formation in Orthogonal Cutting of Rolled Ti-6Al-4V
J. Manuf. Sci. Eng (January 2025)
Modeling and Experimental Investigation of Surface Generation in Diamond Micro-Chiseling
J. Manuf. Sci. Eng (February 2025)
Estimation of Temperature Rise in Magnetorheological Fluid-Based Finishing of Thin Substrate: A Theoretical and Experimental Study
J. Manuf. Sci. Eng (February 2025)
Related Articles
Modeling and Sensitivity Analysis of Laser Tracking Systems by Skew-Ray Tracing Method
J. Manuf. Sci. Eng (August,2005)
Prechamber Equipped Laser Ignition for Improved Performance in Natural Gas Engines
J. Eng. Gas Turbines Power (October,2017)
Measurement of Surface-Displacements Normal to Line of Sight by Holo-Moire´ Interferometry
J. Appl. Mech (March,1975)
Simultaneous Large Scale Sheet Metal Geometry and Strain Measurement
J. Manuf. Sci. Eng (October,2008)
Related Proceedings Papers
Related Chapters
Why Do We Avoid Conflict?
Conflict Resolution: Concepts and Practice (The Technical Manager's Survival Guides)
Accuracy of an Axis
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy
Historical Development of the Windmill
Wind Turbine Technology: Fundamental Concepts in Wind Turbine Engineering, Second Edition