This paper presents a methodology for accurate free vibration analysis of planar flexible mechanisms. Each flexible body is considered as a beam and modelled using higher-order beam elements for longitudinal and flexural deformations. The global equations of motion for a mechanism consisting of multiple flexible bodies are formulated using the augmented Lagrange equations. Free vibration analyses are conducted at desired fast Fourier configurations to determine instantaneous structural natural frequencies and structural mode shapes. Dynamical frequencies and dynamical mode shapes incorporating the gyroscopic effects and dynamic axial loads are obtained using the modal summation method. Numerical results and comparisons are given for a rotating beam and two four-bar crank-rocker mechanisms.

Issue Section:
Technical Papers
Keywords:
flexible structures, vibrations, Fourier analysis
Topics:
Cycles, Deformation, Equations of motion, Free vibrations, Mode shapes, Vibration, Stress, Displacement, System dynamics, Stiffness
1.
Erdman
,
A. G.
, and
Sandor
,
G. N.
,
1972
, “
Kineto-Elastodynamics—A Review of the State of the Art and Trends
,”
Mech. Mach. Theory
,
7
, pp.
19
–
33
.
2.
Huston
,
R. L.
,
1981
, “
Multi-Body Dynamics Including the Effects of Flexibility and Compliance
,”
Comput. Struct.
,
14
(
5–6
), pp.
443
–
451
.
3.
Shabana
,
A. A.
,
1997
, “
Flexible Multibody Dynamics: Review of Past and Recent Developments
,”
Multibody System Dynamics
,
1
(
2
), pp.
189
–
222
.
4.
Song
,
J. O.
, and
Haug
,
E. J.
,
1980
, “
Dynamic Analysis of Planar Flexible Mechanisms
,”
Computer Methods in Applied Mechanics and Engineering
,
24
, pp.
359
–
381
.
5.
Sadler
,
J. P.
,
1975
, “
On the Analytical Lumped-Mass Model of an Elastic Four-Bar Mechanism
,”
ASME J. Eng. Ind.
,
97
(
2
), pp.
561
–
565
.
6.
Cardona
,
A.
, and
Geradin
,
M.
,
1991
, “
Modelling of Superelements in Mechanism Analysis
,”
Int. J. Numer. Methods Eng.
,
32
, pp.
1565
–
1593
.
7.
Badlani, M. L., and Midha, A., 1979, “A Hierarchy of Equations of Motion of Planar Mechanism With Elastic Link,” Proceedings of the 6th Applied Mechanisms Conference, Denver, Colorado, pp. XXII-1-4.
8.
Blejwas, T. E., 1979, “The Simulation of Elastic Mechanisms Using Kinematic Constraints and Lagrange Multipliers,” Proceedings of the 6th Applied Mechanisms Conference, Denver, Colorado, pp. XLIV-1-3.
9.
Meijaard
,
J. P.
,
1991
, “
Direct Determination of Periodic Solutions of the Dynamical Equations of Flexible Mechanisms and Manipulators
,”
Int. J. Numer. Methods Eng.
,
32
, pp.
1691
–
1710
.
10.
Chandrupatla, T. R., and Belegundu, A. D., 1997, Introduction to Finite Element Methods in Engineering, 2nd ed., Prentice Hall, Upper Saddle River, NJ, pp. 393–395.
11.
Yu
,
S. D.
, and
Cleghorn
,
W. L.
,
2002
, “
Dynamic Instability Analysis of High-Speed Flexible Four-Bar Mechanisms
,”
Mech. Mach. Theory
,
37
, pp.
1261
–
1285
.
12.
Walker, J. S., 1991, Fast Fourier Transforms, CRC Press, Boca Raton.
13.
Erdman, E., and Sandor, G. N., 1997, Mechanisms Design Volume I, Prentice Hall.
14.
Meirovitch, L., 1997, Principles and Techniques of Vibrations, Prentice Hall, Upper Saddle River, NJ.
15.
Bathe, K. J., 1996, Finite Element Procedures, Prentice Hall, Upper Saddle River, NJ.
16.
Lu, Y. F., 1996, Dynamics of Flexible Multibody Systems, Higher Education Press, Beijing, 1st ed., pp. 415–420 (in Chinese).
17.
Yoo
,
H. H.
, and
Shih
,
S. H.
,
1998
, “
Vibration Analysis of Rotating Cantilever Beams
,”
J. Sound Vib.
,
212
(
5
), pp.
807
–
828
.
Copyright © 2003
 by ASME
You do not currently have access to this content.