... of the lines. Local recurrence plot (nondimensionalized, last 4 s)—low velocity ice impact at 160 in. (4.064 m) 12 08 2008 21 10 2010 11 04 2011 11 04 2011 beams (structures) cantilevers modal analysis Poincare mapping sea ice stochastic processes vibrations...

... will be presented based on six different FPSO designs. The results will then be analyzed in terms of their differences, and conclusions will be made based upon reliable methodologies for hull girder ultimate strength assessment of FPSOs. 07 04 2009 07 04 2010 31 03 2011 31 03 2011 beams...

.... 10 06 2009 27 09 2010 30 03 2011 30 03 2011 beams (structures) elastic constants internal stresses ships tanks (containers) yield strength A ship hull girder is a complex assembly of unstiffened/stiffened plates, frames, etc. and is subjected to longitudinal...

... and is suitable for 3D riser VIV analysis in deepwater and complex current conditions. 19 02 2009 17 09 2009 17 03 2010 17 03 2010 Riser deflection time history, x / L = 0.5 beams (structures) computational fluid dynamics Navier-Stokes equations vibrations...

... of grouted(I) and ungrouted condition (80% ultimate axial load)) 17 01 2007 23 10 2007 26 09 2008 beams (structures) buckling compressive strength foundations offshore installations stress-strain relations structural engineering There is an increasing demand...

..., since the IACS and DnV scatter diagram are mainly based on onboard observations and measurements, they could implicitly have included the effect of heavy weather avoidance. 10 10 2006 23 05 2007 28 02 2008 beams (structures) hydrodynamics ships wave mechanics In reality...

... – 426 . 16 05 2006 18 03 2007 vibrations ships fatigue beams (structures) water waves remaining life assessment Current design rules applicable for conventional ships are developed to ensure that the hull girder of ships can withstand the critical loads during the life...

.... A. , 2005 , “ On The Effects of a Non-Stationary Seabed on the Morison Hydrodynamic Force for Off-Shore Structures ,” Proceedings OMAE2005 , Halkidiki, Greece, June 12–17, 2005, Paper OMAE 2005 – 67475 . pipelines marine engineering offshore installations beams (structures) foundations...

... model without needing to know the nature and details of the reinforcement. couplings design engineering pipes modal analysis beams (structures) generic parametric equation welded structure tubular joint hot spot stress doubler plate reinforced stress concentration fatigue life...

.... 01 08 2005 03 08 2006 pipelines design engineering sea ice safety statistical analysis springs (mechanical) beams (structures) finite element analysis pipes failure (mechanical) buckling stress-strain relations ductility reliability pipeline finite element methods...

... of the material property are obtained. The response sensitivities are then used to estimate the error in the response predictions, caused by the error in the representation of the stochastic property. Numerical results for a simple Bernoulli beam are presented. finite element analysis beams (structures...

... redesign. 19 06 2003 design stress analysis structural engineering finite element analysis beams (structures) Reduction of excessive static and/or dynamic response of a structure requires reduction of exciting forces and/or structural redesign. Since change of excitation may...

... beams (structures) offshore installations structural engineering design engineering perturbation techniques bending The computational power available to researchers and engineers has been increasing at a remarkable rate since the introduction of computers. This advantage, however, has been...