Skip Nav Destination
Issues
December 2013
ISSN 0094-9930
EISSN 1528-8978
Research Papers
Design and Analysis
Constitutive Law of Finite Deformation Elastoplasticity With Proportional Loadings
J. Pressure Vessel Technol. December 2013, 135(6): 061201.
doi: https://doi.org/10.1115/1.4024581
Topics:
Deformation
,
Constitutive equations
,
Elastoplasticity
Sensitivity Analysis of Fitness-for-Service Assessment Based on Reliability for Cylindrical Pressure Vessels With Local Metal Loss
J. Pressure Vessel Technol. December 2013, 135(6): 061202.
doi: https://doi.org/10.1115/1.4024455
Topics:
Failure
,
Fitness-for-service
,
Metals
,
Probability
,
Reliability
,
Pressure vessels
,
Corrosion
,
Sensitivity analysis
Plastic Load of Precracked Polyethylene Miter Pipe Bends Subjected to In-Plane Bending Moment
J. Pressure Vessel Technol. December 2013, 135(6): 061203.
doi: https://doi.org/10.1115/1.4024658
Topics:
Collapse
,
Pipe bends
,
Stress
,
Fracture (Materials)
,
Pipes
,
Deflection
Systematic Evaluation of Creep-Fatigue Life Prediction Methods for Various Alloys
J. Pressure Vessel Technol. December 2013, 135(6): 061204.
doi: https://doi.org/10.1115/1.4024436
A Full 3D Finite Element Model for Buckling Analysis of Stiffened Steel Liners in Hydroelectric Pressure Tunnels
J. Pressure Vessel Technol. December 2013, 135(6): 061205.
doi: https://doi.org/10.1115/1.4024445
Topics:
Buckling
,
Pressure
,
Steel
,
Tunnels
,
Finite element model
A New Analytical Approach for Wire-Wound Frames Used to Carry the Loads of Pressure Vessel Closures
J. Pressure Vessel Technol. December 2013, 135(6): 061206.
doi: https://doi.org/10.1115/1.4025085
Topics:
Stress
,
Winding (process)
,
Wire
,
Tension
Stress Mitigation Design of a Tubesheet by Considering the Thermal Stress Inducement Mechanism
J. Pressure Vessel Technol. December 2013, 135(6): 061207.
doi: https://doi.org/10.1115/1.4024618
Topics:
Design
,
Stress
,
Thermal stresses
,
Stress concentration
,
Transients (Dynamics)
,
Temperature
Temperature Field Prediction of Rectangular Shell-and-Tube Heat Exchanger
J. Pressure Vessel Technol. December 2013, 135(6): 061208.
doi: https://doi.org/10.1115/1.4024437
Topics:
Fluids
,
Heat exchangers
,
Heat transfer
,
Shells
,
Temperature
,
Flow (Dynamics)
Dimensionless Compliance With Effective Modulus in Crack Length Evaluation for B × B Single Edge Bend Specimens
J. Pressure Vessel Technol. December 2013, 135(6): 061209.
doi: https://doi.org/10.1115/1.4024688
Topics:
Finite element analysis
,
Fracture (Materials)
,
Stress
,
Plane strain
Theoretical and Experimental Analysis of a One-Stage Water Hydraulic Relief Valve With a One-Way Damper
J. Pressure Vessel Technol. December 2013, 135(6): 061210.
doi: https://doi.org/10.1115/1.4025204
Topics:
Dampers
,
Damping
,
Flow (Dynamics)
,
Relief valves
,
Valves
,
Water
,
Pressure
Rational Determination of Lower-Bound Fracture Toughness Curves Using Master Curve Approach
J. Pressure Vessel Technol. December 2013, 135(6): 061211.
doi: https://doi.org/10.1115/1.4025088
Topics:
Fracture toughness
,
Temperature
,
ASTM International
Fluid-Structure Interaction
Investigation of Fluid Transients in Centrifugal Pump Integrated System With MultiChannel Pressure Vessel
J. Pressure Vessel Technol. December 2013, 135(6): 061301.
doi: https://doi.org/10.1115/1.4024457
Topics:
Centrifugal pumps
,
Integrated systems
,
Pressure
,
Pressure vessels
,
Pumps
,
Transients (Dynamics)
,
Vessels
,
Water hammer
,
Boundary-value problems
,
Valves
Materials and Fabrication
Low Cycle Fatigue and Creep-Fatigue Behavior of Alloy 617 at High Temperature
J. Pressure Vessel Technol. December 2013, 135(6): 061401.
doi: https://doi.org/10.1115/1.4025080
Topics:
Alloys
,
Creep
,
Fatigue
,
Low cycle fatigue
,
Cycles
,
High temperature
,
Testing
,
Stress
Weld Strength Mismatch in Strain Based Flaw Assessment: Which Definition to Use?
J. Pressure Vessel Technol. December 2013, 135(6): 061402.
doi: https://doi.org/10.1115/1.4025343
Topics:
Finite element model
,
Fracture (Materials)
,
Geometry
,
Metals
,
Pipes
,
Simulation
,
Stress
,
Elongation
,
Flow (Dynamics)
,
Materials properties
Effect of Partial Welding on the Residual Stress and Structural Integrity of Piping Welds
J. Pressure Vessel Technol. December 2013, 135(6): 061403.
doi: https://doi.org/10.1115/1.4025087
Topics:
Maintenance
,
Stress
,
Welding
,
Pipes
,
Welded joints
,
Finite element methods
,
Stress concentration
Seismic Engineering
Cyclic Deformation Behavior and Buckling of Pipeline With Local Metal Loss in Response to Axial Seismic Loading
J. Pressure Vessel Technol. December 2013, 135(6): 061801.
doi: https://doi.org/10.1115/1.4024451
Topics:
Buckling
,
Deformation
,
Hardening
,
Kinematics
,
Metals
,
Pipes
,
Finite element analysis
,
Pipelines
,
Cycles
Technical Briefs
The Danger of Piping Failure Due to Acoustic-Induced Fatigue in Infrequent Operations: Two Case Studies
J. Pressure Vessel Technol. December 2013, 135(6): 064501.
doi: https://doi.org/10.1115/1.4025081
Topics:
Acoustics
,
Failure
,
Fatigue
,
Pipes
,
Steam
,
Vibration
,
Drainage
,
Fracture (Materials)
,
Piping systems
The Adhesion Failure Mode in Stainless Steel Trim Spring-Operated Pressure Relief Valves
J. Pressure Vessel Technol. December 2013, 135(6): 064502.
doi: https://doi.org/10.1115/1.4025086
Topics:
Adhesion
,
Failure
,
Failure mechanisms
Email alerts
RSS Feeds
Surface Strain Measurement for Non-Intrusive Internal Pressure Evaluation of A Cannon
J. Pressure Vessel Technol
The Upper Bound of the Buckling Stress of Axially Compressed Carbon Steel Circular Cylindrical Shells
J. Pressure Vessel Technol (December 2024)
Crack Growth Prediction Based on Uncertain Parameters Using Ensemble Kalman Filter
J. Pressure Vessel Technol (December 2024)
Machine Learning Modelling for Predicting Tensile Strain Capacity of Pipelines and Identifying Key Factors
J. Pressure Vessel Technol
Defect Detection of Polyethylene Gas Pipeline Based on Convolutional Neural Networks and Image Processing
J. Pressure Vessel Technol
