Skip Nav Destination
Issues
July 2001
ISSN 0742-4787
EISSN 1528-8897
In this Issue
Technical Papers
Preparation of Ni Nanoparticles and Evaluation of Their Tribological Performance as Potential Additives in Oils
J. Tribol. July 2001, 123(3): 441–443.
doi: https://doi.org/10.1115/1.1286152
Topics:
Nanoparticles
,
Petroleum
,
Tribology
,
Wear
,
Friction
,
Microemulsions
Thermo-Elastohydrodynamic Analysis of Connecting Rod Bearing in Internal Combustion Engine
J. Tribol. July 2001, 123(3): 444–454.
doi: https://doi.org/10.1115/1.1353181
Topics:
Bearings
,
Lubrication
,
Cavitation
Characterization of Pelletized Powder Particle Detachment Process
J. Tribol. July 2001, 123(3): 455–461.
doi: https://doi.org/10.1115/1.1310158
Topics:
Compacting
,
Disks
,
Friction
,
Particulate matter
,
Stress
,
Wear
,
Lubricants
,
Tribology
,
Lubrication
,
Pressure
EHD Analysis With Distributed Structural Inertia
J. Tribol. July 2001, 123(3): 462–468.
doi: https://doi.org/10.1115/1.1332396
Analysis of Material Transfer From a Soft Workpiece to a Hard Tool: Part I—Lump Growth Model
J. Tribol. July 2001, 123(3): 469–473.
doi: https://doi.org/10.1115/1.1308009
Topics:
Shear strength
,
Surface roughness
,
Pressure
,
Wear
,
Wedges
,
Density
,
Deformation
,
Cycles
,
Tribology
Analysis of Material Transfer From a Soft Workpiece to a Hard Tool: Part II—Experimental Verification of the Proposed Lump Growth Model
J. Tribol. July 2001, 123(3): 474–478.
doi: https://doi.org/10.1115/1.1308023
Topics:
Aluminum
,
Galling
,
Sheet materials
,
Surface roughness
A Fast and Effective Method for Transient Thermoelastic Displacement Analyses
J. Tribol. July 2001, 123(3): 479–485.
doi: https://doi.org/10.1115/1.1308010
Topics:
Deformation
,
Displacement
,
Heat
,
Thermoelasticity
,
Transients (Dynamics)
,
Frequency response
,
Temperature
,
Fourier transforms
,
Heat flux
,
Steady state
Wear Evaluation and Ranking of Tribomaterials Using a Hasse Diagram Approach
J. Tribol. July 2001, 123(3): 486–493.
doi: https://doi.org/10.1115/1.1308022
Topics:
Wear
,
Wear testing
The Effect of Shear Flow and Dissolved Gas Diffusion on the Cavitation in a Submerged Journal Bearing
J. Tribol. July 2001, 123(3): 494–500.
doi: https://doi.org/10.1115/1.1308026
Topics:
Bubbles
,
Cavitation
,
Cavities
,
Diffusion (Physics)
,
Journal bearings
,
Lubricants
,
Pressure
,
Shear (Mechanics)
,
Flow (Dynamics)
,
Bearings
Static and Dynamic Characteristics of Aerostatic Circular Porous Thrust Bearings (Effect of the Shape of the Air Supply Area)
J. Tribol. July 2001, 123(3): 501–508.
doi: https://doi.org/10.1115/1.1308027
Topics:
Bearings
,
Porous materials
,
Thrust bearings
,
Shapes
,
Flow (Dynamics)
,
Clearances (Engineering)
Improvement of Web Spacing and Friction Characteristics by Two Types of Stationary Guides
J. Tribol. July 2001, 123(3): 509–516.
doi: https://doi.org/10.1115/1.1308033
Topics:
Friction
,
Pressure
,
Tension
,
Surface roughness
,
Air entrainment
,
Air flow
Numerical Study of a Rotary Lip Seal With a Quasi-Random Sealing Surface
J. Tribol. July 2001, 123(3): 517–524.
doi: https://doi.org/10.1115/1.1308028
Topics:
Cavitation
,
Computer simulation
,
Deformation
,
Film thickness
,
Friction
,
Pressure
,
Sealing (Process)
,
Surface roughness
,
Shear deformation
Influence of Inlet Conditions on the Thermohydrodynamic State of a Fully Circumferentially Grooved Journal Bearing
J. Tribol. July 2001, 123(3): 525–532.
doi: https://doi.org/10.1115/1.1308029
Topics:
Bearings
,
Lubricants
,
Temperature
,
Pressure
,
Flow (Dynamics)
Spreading Mechanism of PFPE Lubricant on the Magnetic Disks
J. Tribol. July 2001, 123(3): 533–540.
doi: https://doi.org/10.1115/1.1308030
Topics:
Disks
,
Lubricants
,
Lubrication
Optimal Design of HDD Air-Lubricated Slider Bearings for Improving Dynamic Characteristics and Operating Performance
J. Tribol. July 2001, 123(3): 541–547.
doi: https://doi.org/10.1115/1.1308031
Topics:
Air bearings
,
Design
,
Optimization
,
Rails
,
Stiffness
,
Steady state
,
Lubrication
Slider Vibration Analysis at Contact Using Time-Frequency Analysis and Wavelet Transforms
J. Tribol. July 2001, 123(3): 548–554.
doi: https://doi.org/10.1115/1.1308035
Topics:
Disks
,
Signals
,
Time-frequency analysis
,
Wavelet transforms
,
Resolution (Optics)
The Effect of Porosity on the Head-Media Interface
J. Tribol. July 2001, 123(3): 555–560.
doi: https://doi.org/10.1115/1.1308036
Topics:
Coatings
,
Permeability
,
Porosity
,
Porous materials
,
Pressure
,
Bearings
,
Surface roughness
,
Finite element model
,
Lubrication
,
Flow (Dynamics)
Head-Disk Dynamics in the Flying, Near Contact, and Contact Regimes
J. Tribol. July 2001, 123(3): 561–565.
doi: https://doi.org/10.1115/1.1308037
Topics:
Disks
,
Jitter
,
Signals
,
Air bearings
Thermal Features of Compliant Foil Bearings—Theory and Experiments
J. Tribol. July 2001, 123(3): 566–571.
doi: https://doi.org/10.1115/1.1308038
Topics:
Bearings
,
Foil bearings
,
Stress
,
Temperature
,
Cooling
,
Flow (Dynamics)
,
Lubricants
,
Heat
Vapor-Phase Lubrication in Combined Rolling and Sliding Contacts: Modeling and Experimentation
J. Tribol. July 2001, 123(3): 572–581.
doi: https://doi.org/10.1115/1.1308039
Topics:
Disks
,
Friction
,
Lubricants
,
Lubrication
,
Modeling
,
Stress
,
Vapors
,
Wear
,
Pressure
,
Steady state
An Engineering Approach to Hertzian Contact Elasticity—Part I
J. Tribol. July 2001, 123(3): 582–588.
doi: https://doi.org/10.1115/1.1308043
Topics:
Bearings
,
Deformation
,
Rollers
,
Stress
,
Pressure
,
Curve fitting
,
Elasticity
An Engineering Approach to Non-Hertzian Contact Elasticity—Part II
J. Tribol. July 2001, 123(3): 589–594.
doi: https://doi.org/10.1115/1.1308042
Topics:
Bearings
,
Deformation
,
Pressure
,
Rollers
,
Stress
,
Elasticity
A Three-Dimensional Thermal-Mechanical Asperity Contact Model for Two Nominally Flat Surfaces in Contact
J. Tribol. July 2001, 123(3): 595–602.
doi: https://doi.org/10.1115/1.1308044
Topics:
Deformation
,
Heat
,
Heat transfer
,
Heating
,
Pressure
,
Stress
,
Surface roughness
,
Temperature
,
Thermoelasticity
,
Tribology
Stream Functions and Streamlines for Visualizing and Quantifying Side Flows in EHL of Elliptical Contacts
J. Tribol. July 2001, 123(3): 603–607.
doi: https://doi.org/10.1115/1.1308040
Topics:
Flow (Dynamics)
,
Lubricants
Steady State Performance Characteristics of a Tilting Pad Thrust Bearing
J. Tribol. July 2001, 123(3): 608–615.
doi: https://doi.org/10.1115/1.1308041
Topics:
Bearings
,
Film thickness
,
Pressure
,
Stress
,
Temperature
,
Thrust bearings
,
Steady state
,
Performance characterization
Investigation of Slider Vibrations Due to Contact With a Smooth Disk Surface
J. Tribol. July 2001, 123(3): 616–623.
doi: https://doi.org/10.1115/1.1308045
Topics:
Disks
,
Vibration
,
Lubricants
Nanomechanical Properties of Polymers Determined From Nanoindentation Experiments
C. Klapperich, Graduate Student, K. Komvopoulos, Professor Fellow ASME, L. Pruitt, Associate Professor
J. Tribol. July 2001, 123(3): 624–631.
doi: https://doi.org/10.1115/1.1330736
Topics:
Adhesion
,
Nanoindentation
,
Polymers
,
Stress
,
Elastic moduli
,
Deformation
Three-Dimensional Contact Analysis of Elastic-Plastic Layered Media With Fractal Surface Topographies
J. Tribol. July 2001, 123(3): 632–640.
doi: https://doi.org/10.1115/1.1327583
Topics:
Deformation
,
Disks
,
Fractals
,
Pressure
,
Stress
,
Surface roughness
,
Carbon
,
Constitutive equations
,
Materials properties
,
Finite element analysis
Nanotribological and Nanomechanical Properties of Ultrathin Amorphous Carbon Films Synthesized by Radio Frequency Sputtering
J. Tribol. July 2001, 123(3): 641–650.
doi: https://doi.org/10.1115/1.1339977
Topics:
Carbon films
,
Diamonds
,
Friction
,
Nanoscale phenomena
,
Sputtering (Irradiation)
,
Stress
,
Surface roughness
,
Wear
,
Wear resistance
,
Mechanical properties
Technical Note
Stability of Flexibly Supported Oil Journal Bearings Using Non-Newtonian Lubricants: Linear Perturbation Analysis
J. Tribol. July 2001, 123(3): 651–654.
doi: https://doi.org/10.1115/1.1340632
Topics:
Bearings
,
Journal bearings
,
Lubricants
,
Stability
Discussion
Discussion: “Analysis of Stresses Induced by Dynamic Load Head-Disk Contacts” (Fu, Ra-Chang and Bogy, David B., 2000, ASME J. Tribology, 122, No. 1, pp. 233–237)
J. Tribol. July 2001, 123(3): 655.
doi: https://doi.org/10.1115/1.1352743
Topics:
Disks
,
Stress
,
Tribology
,
Magnetic disc storage
,
Magnetic heads
,
Stress analysis (Engineering)
Email alerts
RSS Feeds
Tribological Behavior of Annealed FeCoNiMn0.25Al0.25 High-Entropy Alloy
J. Tribol (November 2025)
Friction Reduction and Lubrication Performance of New Microemulsion Cutting Fluid for AISI 1045
J. Tribol (December 2025)
Friction and Wear Behaviors of HT200 Sliding Against QT600 Under Flame Ablation Environment
J. Tribol (December 2025)