... in a numerical scheme designed to provide a full thermomechanical solution for real layered contacts. The model assumes steady state heat transfer and predicts contact pressures and deformations, contact temperature rise, and resulting thermal stresses. The heat division between the contacting components...

...Vincent Boucly; Daniel Ne´lias; Shuangbiao Liu; Q. Jane Wang; Leon M. Keer The stress field within machine components is an important indicator for contact failures. Since both thermal stresses due to frictional heating and plasticity are significant in engineering application, it is critical...

... . Krempaszky , C. , and Lippmann , H. , 2003 , “ Frictionally Excited Thermoelastic Instabilities of Plates under Thermal Pre-Stress ,” in Proceedings of the 5th International Congress on Thermal Stresses and Related Topics, Blacksburg, VA, June. 8–11, 2003 , L. Librescu , and P. Marzocca...

...: M. D. Bryant. 23 March 2000 14 September 2000 lubrication hydrodynamics mechanical contact liquid films tribology thermal stresses TEHL solutions for the high slide-roll problems are, however, of great importance. Dyson and Wilson 7 have pointed out...

... January 21, 2000; revised manuscript received August 17, 2000. Associate Editor: B. O. Jacobson. 21 January 2000 17 August 2000 lubrication plastic deformation mechanical contact thermal stresses Frictional and shear heating has been the mode that is traditionally modeled...

... the results obtained from the initial model. The new results showed that soft contaminants could indeed be very destructive and damage a concentrated sliding contact mainly due to the thermal stresses developed from the frictional heating of the contact during the plastic compression and shearing...

... mechanical testing friction thermal stresses thermoelasticity mechanical contact It is quite difficult to control the contact conditions in a friction material fatigue test since elastic and thermal phenomena are coupled. In the bump test, a bump plate with machined radial bumps across one of its...

... Division February 16, 2000; revised manuscript received August 1, 2000. Associate Editor: G. G. Adams. 16 February 2000 01 August 2000 rough surfaces mechanical contact tribology thermal stresses elastic deformation Frictional heating of rough surfaces is inevitable...

.../disk interface designs where the slider will be permitted to contact the disk surface intermittently throughout the designed life of the recording device. mechanical contact magnetic disc storage disc drives magnetostriction thermal stresses data integrity 10 October 1999 10...