Abstract

This article presents exact algebraic solutions to optimization problems of a double-mass dynamic vibration absorber (DVA) attached to a viscous damped primary system. The series-type double-mass DVA was optimized using three optimization criteria (the H optimization, H2 optimization, and stability maximization criteria), and exact algebraic solutions were successfully obtained for all of them. It is extremely difficult to optimize DVAs when there is damping in the primary system. Even in the optimization of the simpler single-mass DVA, exact solutions have been obtained only for the H2 optimization and stability maximization criteria. For H optimization, only numerical solutions and an approximate perturbation solution have been obtained. Regarding double-mass DVAs, an exact algebraic solution could not be obtained in this study in the case where a parallel-type DVA is attached to the damped primary system. For the series-type double-mass DVA, which was the focus of the present study, an exact algebraic solution was obtained for the force excitation system, in which the disturbance force acts directly on the primary mass; however, an algebraic solution was not obtained for the motion excitation system, in which the foundation of the system is subjected to a periodic displacement. Because all actual vibration systems involve damping, the results obtained in this study are expected to be useful in the design of actual DVAs. Furthermore, it is a great surprise that an exact algebraic solution exists even for such complex optimization problems of a linear vibration system.

References

1.
Watts
,
P.
,
1883
, “
On a Method of Reducing the Rolling of Ships at Sea
,”
Trans. Inst. Nav. Arch.
,
24
, pp.
165
190
.
2.
Frahm
,
H.
,
1911
, “
Device for Damping Vibrations of Bodies
,” U.S. Patent No. 989,958, pp.
704
705
, 3576–3580.
3.
Ormondroyd
,
J.
, and
Den Hartog
,
J. P.
,
1928
, “
The Theory of the Dynamic Vibration Absorber
,”
ASME J. Appl. Mech.
,
50
(
7
), pp.
9
22
.
4.
Hahnkamm
,
E.
,
1932
, “
Die Dämpfung von Fundamentschwingungen bei veränderlicher Erregergrequenz
,”
Ingenieur Archiv.
,
4
(
2
), pp.
192
201
(in German).
5.
Brock
,
J. E.
,
1946
, “
A Note on the Damped Vibration Absorber
,”
ASME J. Appl. Mech.
,
13
(
4
), p.
A-284
.
6.
Nishihara
,
O.
, and
Asami
,
T.
,
2002
, “
Closed-Form Solutions to the Exact Optimizations of Vibration Absorbers (Minimizations of the Maximum Amplitude Magnification Factors)
,”
ASME J. Vib. Acoust.
,
124
(
4
), pp.
576
582
.
7.
Asami
,
T.
, and
Nishihara
,
O.
,
2003
, “
Closed-Form Solution to H∞ Optimization of Dynamic Vibration Absorbers (Application to Different Transfer Functions and Damping Systems)
,”
ASME J. Vib. Acoust.
,
125
(
3
), pp.
398
405
.
8.
Nishihara
,
O.
,
2017
, “
Minimization of Maximum Amplitude Magnification Factor in Designing Double-Mass Dynamic Vibration Absorbers (Application of Optimality Criteria Method to Parallel and Series Types)
,”
Trans. JSME
,
83
(
849
), p.
16-00549
(in Japanese).
9.
Nishihara
,
O.
,
2019
, “
Exact Optimization of a Three-Element Dynamic Vibration Absorber: Minimization of the Maximum Amplitude Magnification Factor
,”
ASME J. Vib. Acoust.
,
141
(
1
), p.
011001
.
10.
Ikegame
,
T.
,
Takagi
,
K.
, and
Inoue
,
T.
,
2019
, “
Exact Solutions to H∞ and H2 Optimizations of Passive Resonant Shunt for Electromagnetic or Piezoelectric Shunt Damper
,”
ASME J. Vib. Acoust.
,
141
(
3
), p.
031015
.
11.
Ikeda
,
K.
, and
Ioi
,
T.
,
1978
, “
On the Dynamic Vibration Damped Absorber of the Vibration System
,”
Bull. JSME
,
21
(
151
), pp.
64
71
.
12.
Randall
,
S. E.
,
Halsted
,
D. M.
, and
Taylor
,
D. L.
,
1981
, “
Optimum Vibration Absorbers for Linear Damped System
,”
ASME J. Mech. Des.
,
103
(
4
), pp.
908
913
.
13.
Thompson
,
A. G.
,
1981
, “
Optimum Tuning and Damping of a Dynamic Vibration Absorber Applied to a Force Excited and Damped Primary System
,”
J. Sound Vib.
,
77
(
3
), pp.
403
415
.
14.
Soom
,
A.
, and
Lee
,
M.
,
1983
, “
Optimal Design of Linear and Nonlinear Vibration Absorbers for Damped System
,”
ASME J. Vib. Acoust.
,
105
(
1
), pp.
112
119
.
15.
Sekiguchi
,
H.
, and
Asami
,
T.
,
1984
, “
Theory of Vibration Isolation of a System With Two Degrees of Freedom
,”
Bull. JSME
,
27
(
234
), pp.
2839
2846
.
16.
Asami
,
T.
,
Nishihara
,
O.
, and
Baz
,
A. M.
,
2002
, “
Analytical Solutions to H∞ and H2 Optimization of Dynamic Vibration Absorbers Attached to Damped Linear Systems
,”
ASME J. Vib. Acoust.
,
124
(
2
), pp.
284
295
.
17.
Crandall
,
S. H.
, and
Mark
,
W. D.
,
1963
,
Random Vibration in Mechanical Systems
,
Academic Press
,
New York
, p.
71
.
18.
Warburton
,
G. B.
,
1982
, “
Optimum Absorber Parameters for Vibration Combinations of Response and Excitation Parameters
,”
Earthquake Eng. Struct. Dyn.
,
10
(
3
), pp.
381
401
.
19.
Nishihara
,
O.
, and
Matsuhisa
,
H.
,
1997
, “
Design and Tuning of Vibration Control Devices via Stability Criterion
,”
Proceedings of the Dynamics and Design Conference ’97 (in Japanese)
, pp.
165
168
, No. 97-10-1.
20.
Iwanami
,
K.
, and
Seto
,
K.
,
1984
, “
An Optimum Design Method for the Dual Dynamic Damper and Its Effectiveness
,”
Bull. JSME
,
27
(
231
), pp.
1965
1973
.
21.
Kamiya
,
K.
,
Kamagata
,
K.
,
Matsumoto
,
S.
, and
Seto
,
K.
,
1996
, “
Optimal Design Method for Multi Dynamic Absorber
,”
Trans. JSME, Ser. C
,
62
(
601
), pp.
3400
3405
(in Japanese).
22.
Yasuda
,
M.
, and
Pan
,
G.
,
2003
, “
Optimization of Two-Series-Mass Dynamic Vibration Absorber and Its Vibration Control Performance
,”
Trans. JSME, Ser. C
,
69
(
688
), pp.
3175
3182
(in Japanese).
23.
Pan
,
G.
, and
Yasuda
,
M.
,
2005
, “
Robust Design Method of Multi Dynamic Vibration Absorber
,”
Trans. JSME, Ser. C
,
71
(
712
), pp.
3430
3436
(in Japanese).
24.
Zuo
,
L.
,
2009
, “
Effective and Robust Vibration Control Using Series Multiple Tuned-Mass Dampers
,”
ASME J. Vib. Acoust.
,
131
(
3
), p.
031003
.
25.
Zuo
,
L.
, and
Cui
,
W.
,
2013
, “
Dual-Functional Energy Harvesting and Vibration Control: Electromagnetic Resonant Shunt Series Tuned Mass Dampers
,”
ASME J. Vib. Acoust.
,
135
(
5
), p.
051018
.
26.
Tang
,
X.
,
Liu
,
Y.
,
Cui
,
W.
, and
Zuo
,
L.
,
2016
, “
Analytical Solutions to H2 and H∞ Optimizations of Resonant Shunted Electromagnetic Tuned Mass Damper and Vibration Energy Harvester
,”
ASME J. Vib. Acoust.
,
138
(
1
), p.
011018
.
27.
Liu
,
Y.
,
Ling
,
C.
,
Parker
,
J.
, and
Zuo
,
L.
,
2016
, “
Exact H2 Optimal Tuning and Experimental Verification of Energy-Harvesting Series Electromagnetic Tuned-Mass Dampers
,”
ASME J. Vib. Acoust.
,
138
(
6
), p.
061003
.
28.
Argentini
,
T.
,
Belloli
,
M.
, and
Borghesani
,
P.
,
2015
, “
A Closed-Form Optimal Tuning of Mass Dampers for One Degree-of-Freedom Systems Under Rotating Unbalance Forcing
,”
ASME J. Vib. Acoust.
,
137
(
3
), p.
034501
.
29.
Soltani
,
P.
,
Kerschen
,
G.
,
Tondreau
,
G.
, and
Deraemaeker
,
A.
,
2014
, “
Piezoelectric Vibration Damping Using Resonant Shunt Circuits: An Exact Solution
,”
Smart Mater. Struct.
,
23
(
12
), p.
125014
.
30.
Asami
,
T.
,
2017
, “
Optimal Design of Double-Mass Dynamic Vibration Absorbers Arranged in Series or in Parallel
,”
ASME J. Vib. Acoust.
,
139
(
1
), p.
011015
.
31.
Asami
,
T.
,
2018
, “
Erratum: Optimal Design of Double-Mass Dynamic Vibration Absorbers Arranged in Series or in Parallel [ASME J. Vib. Acoust., 2017, 139(1), p. 011015; DOI: 10.1115/1.4034776]
,”
ASME J. Vib. Acoust.
,
140
(
2
), p.
027001
.
32.
Asami
,
T.
,
Mizukawa
,
Y.
, and
Ise
,
T.
,
2018
, “
Optimal Design of Double-Mass Dynamic Vibration Absorbers Minimizing the Mobility Transfer Function
,”
ASME J. Vib. Acoust.
,
140
(
6
), p.
061012
.
33.
Kreyszig
,
E.
,
1999
,
Advanced Engineering Mathematics
, 8th ed.,
John Wiley & Sons Inc.
,
New York
, p.
784
.
You do not currently have access to this content.